Profile Image
Maple 3D Printing
Maple 3D Printing

Maple 3D Printing

Select a membership plan

Monthly billing
Annual billing

Model is included in this plan
Available now

13% off
Mighty Maple1,210 members
Mighty Maple
$9.57
/ month
when billed annually
✅ Welcome pack: 70 FREE models

ATTENTION! For the popular Window Series models, there are some that are now only available after 3 months of subscription. Please check the model before signing up to see if it is available right now or not.

What do I get? Welcome Package of models:
A collection of some of the previous models that have been released over the course of this Patreon. You can see everything available over at https://www.maple3dprinting.com/file-gallery

Monthly releases for the month that you are signed up for that include Basic and Ornamental models, Diorama and Bust, and whatever other fun designs I can come up with! If you want to see what is available to you right now you can head over to my website and check out the gellery on the home page. www.maple3dprinting.com

After 3 months of consecutive subscription you will gain access to the Archive of models that has everything released dating back to January 2022. (These are slowly being added to the Thangs catalogue as there are SO MANY!)

I also have Loyalty Packages available at 6 and 9 months of consecutive subscription.

Models Include: Ornamental & Basic versions of Pokemon, Diorama Pieces, Digimon, Yu-Gi-Oh!, One Piece, Dice Towers, Skulls, Book Nooks, and so much more!

You can find out more information over on my website www.maple3dprinting.com

Most of what I design is Fan Art and not licensed material from their respective owners. By supporting this Patreon you are supporting me and my hobby of 3D design and 3D printing. If you choose to sell the finished prints of the digital models, all sales are the sellers responsibility.

Immediate access. Cancel anytime.
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Mike H
Maple 3D Printing3.8K followers
Follow
Maple 3D Printing
Maple 3D Printing
|
Image 1 of 11
Window Pikachu - Pokemon 3d model
Maple 3D Printing
Maple 3D Printing
|
Image 1 of 11
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model
Window Pikachu - Pokemon 3d model

Window Pikachu - Pokemon

1.4K downloads · 6 months ago · Membership Exclusive model as part of my Thangs or Patreon Memberships Minor Supports needed painte
Description

Membership Exclusive model as part of my Thangs or Patreon Memberships

Minor Supports needed painted 3mf included Split model for full color print

Sign up for my Patreon or Thangs membership to get models like this every month!

www.maple3dprinting.com

Tags:

Community Makes (13)
Make by user
Make by user
Make by user
All good ;)!
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon!
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm.
I have had some problems in certain areas, especially on overhangs and supports. Has anyone had better results and could advise me? I have already tried several parameters on the supports and increasing the fan speed and also lowering the printing speed.
THIS TURNED OUT SICK!!
And it begins!! Tweaked a couple settings to dial this bad boy to my liking
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun.
I absolutely love the model, however would you have any suggestions for best way to avoid the yellow being somewhat "see-through" as you can see in my photos. This is 100% an issue on my side as opposed to the design, I know there are some settings I can tweak like wall loops, but thought I'd ask here before changing anything and trying again. This was scaled down significantly to fit inside of a PC tower case :)
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :)
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky.
Make by user
Make by user
Make by user
All good ;)!
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon!
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm.
I have had some problems in certain areas, especially on overhangs and supports. Has anyone had better results and could advise me? I have already tried several parameters on the supports and increasing the fan speed and also lowering the printing speed.
THIS TURNED OUT SICK!!
And it begins!! Tweaked a couple settings to dial this bad boy to my liking
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun.
I absolutely love the model, however would you have any suggestions for best way to avoid the yellow being somewhat "see-through" as you can see in my photos. This is 100% an issue on my side as opposed to the design, I know there are some settings I can tweak like wall loops, but thought I'd ask here before changing anything and trying again. This was scaled down significantly to fit inside of a PC tower case :)
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :)
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky.
Community Makes (13)
Make by user
Make by user
Make by user
All good ;)!
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon!
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm.
I have had some problems in certain areas, especially on overhangs and supports. Has anyone had better results and could advise me? I have already tried several parameters on the supports and increasing the fan speed and also lowering the printing speed.
THIS TURNED OUT SICK!!
And it begins!! Tweaked a couple settings to dial this bad boy to my liking
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun.
I absolutely love the model, however would you have any suggestions for best way to avoid the yellow being somewhat "see-through" as you can see in my photos. This is 100% an issue on my side as opposed to the design, I know there are some settings I can tweak like wall loops, but thought I'd ask here before changing anything and trying again. This was scaled down significantly to fit inside of a PC tower case :)
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :)
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky.
Make by user
Make by user
Make by user
All good ;)!
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon!
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm.
I have had some problems in certain areas, especially on overhangs and supports. Has anyone had better results and could advise me? I have already tried several parameters on the supports and increasing the fan speed and also lowering the printing speed.
THIS TURNED OUT SICK!!
And it begins!! Tweaked a couple settings to dial this bad boy to my liking
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun.
I absolutely love the model, however would you have any suggestions for best way to avoid the yellow being somewhat "see-through" as you can see in my photos. This is 100% an issue on my side as opposed to the design, I know there are some settings I can tweak like wall loops, but thought I'd ask here before changing anything and trying again. This was scaled down significantly to fit inside of a PC tower case :)
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :)
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky.
Discussions
Trevor3DPrints
Trevor3DPrints3 months ago
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun.
Printed on the H2C in one piece in 5 colors. Scaled size to my liking. Love be these window models they are so cute and fun. 3d model
3d model
3d model
3d model
MaterialPLA
Brandon W
brandonrwigginton5 months ago
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky.
Was told to do window Pikachu so I did ! Now he gets to sit right next to charmander. Be careful with the very small nose and eyes, those are tricky. 3d model
3d model
3d model
PrinterAnycubic Kobra S1
MaterialPLA
Layer height0.12 mm
Infill density5 %
SupportsTree
Ray C
DawnStar Stamping27 days ago
3d model
PrinterOther
Printer modelSnapmaker U1
MaterialPLA+
ewfsew
maik.thiel172 months ago
All good ;)!
All good ;)! 3d model
MaterialPLA
Layer height0.2 mm
SupportsTree
BrimNo
MulticolorMultiple Hotends
donellelaws
donellelaws4 months ago
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :)
I hope you do more of the adorable window guys!!! <3 I just shared my 1 print on TIKTOK :) I'm going to print all 5 of them you have for my front window :) 3d model
PrinterBambu Lab H2D
MaterialPLA
Lewis M
lewmarday223 months ago
THIS TURNED OUT SICK!!
THIS TURNED OUT SICK!! 3d model
3d model
3d model
3d model
PrinterBambu Lab A1
MaterialPLA+
Layer height1.6 mm
Infill density5 %
SupportsTree
James D
jswagg2163 days ago
3d model
Nazzareno Gabriele S
gz.3dart1 month ago
Amazing models! any version you provided went out clean from the printer i tried to replicate the "real size" (41cm Height) by slicing it in half, i just need to figure it out how to remove the problem between the ear (but that' just why i'm playing with the model). Great Job!
Amazing models! any version you provided went out clean from the printer i tried to replicate the "real size" (41cm Height) by slicing it in half, i just need to figure it out how to remove the problem between the ear (but that' just why i'm playing with the model). Great Job! 3d model
3d model
3d model
3d model
3d model
3d model
PrinterBambu Lab A1
MaterialPETG
Layer height0.2 mm
Infill density15 %
SupportsTree
Crisendo
Crisendo2 months ago
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon!
I recorded the make into a YouTube short: https://youtube.com/shorts/PYUggpgzvyk Cute little window display, the added sparkle from the Prusament PLA (Prusa Galaxy Black and Galaxy Red) adds a nice little touch for the Electric type Pokemon! 3d model
3d model
PrinterPrusa XL
MaterialPLA
SupportsTree - Manual
Material BrandsPrusament PLA and OVERTURE PLA
Josue T
tlachiditodg3 months ago
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm.
The design is very nice and with my previous post I was able to slightly reduce the overhang by increasing the fan, decreasing the speed on the outer wall and the temperature, increasing its thickness to 0.45 mm. 3d model
PrinterBambu Lab A1
MaterialPLA+
Layer height0.12 mm
SupportsTree
View all 20 discussions

Window Pikachu - Pokemon

1.4K downloads · 6 months ago in 
Home Decor & Accessories
 and 
Dioramas & Scenery
Mike H
Maple 3D Printing3.8K followers
Follow

More models

Mike H
Maple 3D Printing
Window Espeon 3d model

Window Espeon

Mike H
Maple 3D Printing
Window Umbreon 3d model

Window Umbreon

Mike H
Maple 3D Printing
644. Zekrom - Basic & Ornamental 3d model

644. Zekrom - Basic & Ornamental

Mike H
Maple 3D Printing
491. Darkrai - Basic & Ornamental 3d model

491. Darkrai - Basic & Ornamental

Mike H
Maple 3D Printing
Window Mewtwo 3d model

Window Mewtwo

Mike H
Maple 3D Printing
Window Mew 3d model

Window Mew

Mike H
Maple 3D Printing
Window Psyduck 3d model

Window Psyduck

Mike H
Maple 3D Printing
Window Gengar - Pokemon 3d model

Window Gengar - Pokemon

Mike H
Maple 3D Printing
Window Snorlax 3d model

Window Snorlax

Mike H
Maple 3D Printing
Window Eevee 3d model

Window Eevee

Mike H
Maple 3D Printing
Window Jigglypuff 3d model

Window Jigglypuff

Mike H
Maple 3D Printing
Lugia Bust 3d model

Lugia Bust

Mike H
Maple 3D Printing
309. Electrike - Basic & Ornamental 3d model

309. Electrike - Basic & Ornamental

Mike H
Maple 3D Printing
235. Smeargle - Basic & Ornamental 3d model

235. Smeargle - Basic & Ornamental

Mike H
Maple 3D Printing
Lugia Diorama 3d model

Lugia Diorama

Mike H
Maple 3D Printing
Flareon Bust 3d model

Flareon Bust

Mike H
Maple 3D Printing
Tyrunt Skull - Solid & Hollow 3d model

Tyrunt Skull - Solid & Hollow

Mike H
Maple 3D Printing
Flareon Diorama 3d model

Flareon Diorama

Mike H
Maple 3D Printing
111. Rhyhorn - Basic & Ornamental 3d model

111. Rhyhorn - Basic & Ornamental

Mike H
Maple 3D Printing
696. Tyrunt - Basic & Ornamental 3d model

696. Tyrunt - Basic & Ornamental