A simple yet fun 1:32 gear box. Made for 8mm shaft for the holder and 22mm Outer diameter bearings. See this project in action after being laser cut here: https://youtu.be/BQHcjZNjY8U

Support these free models & get access too exclusive .blend files and the creation videos of this model to learn to make your own designs by joining my [Thangs Membership ](https://thangs.com/designer/MakerTales)

1:32 Gear Box

3d print Gears all together.stl

Hooking system to hold multiple types of masking tape.

Support these free models & get access too exclusive .blend files and the creation videos of this model to learn to make your own designs by joining my [Thangs Membership ](https://thangs.com/designer/MakerTales)

Multi Tape Holder

A double hook too be used on a French cleat.
Support these free models & get access too exclusive .blend files and the creation videos of this model to learn to make your own designs by joining my [Thangs Membership ](https://thangs.com/designer/MakerTales)

ShapeMuse Earings

all Earings.stl

A simple little clipt to put on to buckets to help identify the type of clay that's in it.

Support these free models & get access too exclusive .blend files and the creation videos of this model to learn to make your own designs by joining my [Thangs Membership ](https://thangs.com/designer/MakerTales)

Clay Bucket Identifying Clip

Double Cleat Hook

A double hook too be used on a french cleat.
Support these free models & get access too exclusive .blend files and the creation videos of this model to learn to make your own designs: [https://thangs.com/mythangs/file/863690](https://thangs.com/mythangs/file/863690) 

[CLICK HERE FOR THE EXCLUSIVE BLENDER PRECISION SETUP VIDEO ](https://muse.ai/vd/qZA7Bzn)

**Password is in the additional files that are in the download**

Exclusive Blender Precision Setup

[CLICK HERE FOR THE EXCLUSIVE BLENDER PRECISION SETUP VIDEO ](https://muse.ai/vd/qZA7Bzn)

Password: makerthangs2947

Sculpted from scratch for this project video: https://youtu.be/So_hXV-bwGg

This is a lower-resolution version as most online platforms do not support 600mb mesh files. Should still be plenty of resolution tho.

Peter Pettigrew Wand | Wormtail 

Remix of I love 3d printing by Emanuel Chmielowski

Made a version that starts with design and testing out the new .blend support

Remix of I love 3d printing

I love 3d printing

THe file used in my 24K Golden Snitch video:  [https://youtu.be/ieN8xgH7xks](https://youtu.be/ieN8xgH7xks) 

WIngs are remixed and from: https://www.thingiverse.com/thing:424612

The body is a paid asset that gives me royalty-free licence.

Please respect the wings license which is CC 3.0
https://creativecommons.org/licenses/by-sa/3.0/

Golden Snitch - Happy Potter

Snitch All Together.stl

A Hairify remix of this great model: [https://www.printables.com/model/48093-grinch-christmas-ornament](https://www.printables.com/model/48093-grinch-christmas-ornament)

(Please respect the original model license which is CC 4.0)

If you want to be able to make your own Hairy creations check this video out: [https://youtu.be/_L1gcb_Halc](https://youtu.be/_L1gcb_Halc)

Hairy Grinch Bauble

A pair of hooks to mount your 6mm Pegboards onto a cleat making them more versatile than ever!


see these lovely little pegboard cleat hooks in action right here: [https://youtu.be/qIaC3iQplTU](https://youtu.be/qIaC3iQplTU)

6mm Pegboard Cleat Hook

6mm Pegboad Cleat system 1 Pair Layed out.stl

My favorite pegboard accessory an omnidirectional hook. Incredibly versatile when I'm to lazy make other designs

See these lovely hooks in action here: [https://youtu.be/qIaC3iQplTU](https://youtu.be/qIaC3iQplTU)


Omnidirectional Hook for 6mm Pegboards

A quick little project made using precision bolts in blender: https://bit.ly/MTPBolts

Bolt & Nut Pencil Pot

Bolt Pot Bolt.stl

A quick and straightforward print to test your 3D printing clearance / tolerances. 

Crystal Clearance Tower & Tolerance Card

Crystal Clearance Tower - Maker Tales.stl

Gu Pot Lid

An Iris lid to go on top of the Gu Jar.

Original Iris design: https://www.thingiverse.com/thing:5220607

Iris Lid For Gu Jar

Iris lid Blades

A simple little fruit fly trap for a Gu glass jar

Fruit Fly Trap

A contraption to hold to Gu jars for storage or for some cute fairy light lamps.

Gu Jar Low Polly Containers

Simple Pill low poly

A little contraction to add Gu jars as storage under a desk or shelf

Gu Jar Under desk | Shelf Storage

A small totoro piggy bank to fit on top of GU pots.

Origial totoro can be found here: https://www.thingiverse.com/thing:12146

Totoro Piggy Bank

A simple yet addictive Gear Fidget Toy. If you would like to see how this was designed you can see it here as part of a 10-minute design challenge: https://youtu.be/rcmXukGJqeg

Fidget Herringbone Gears

Gear Fidget.stl

A simple yet effective apple watch dock made to be stuck to the side of a bedside table with strong double-sided tape. If you would like to see how this was designed you can see it here as part of a 10 minute design challenge: https://youtu.be/oyEgbeY3crk 
#MakerMadness 

Apple Watch Dock

Apple Watch Dock 0.15 Clearance.stl

A tiny little tool designed to help establish correct scaling in photogrammetry. To see this in action check out this video: https://youtu.be/TiSGfKm5cFQ

10cm Scale Points For Photogrammetry

A magnetic stud finder designed in 10 minutes. You can see the full video of this https://youtu.be/TMOiUB86ocs

Magnetic Stud Finder

Magnetic Stud FInder Thangs.stl

A Desk Organizer that has as many elements as I could model into it in the course of 1 hour. You can see the full video of this here: https://youtu.be/vlp51GApUUk

All In One Desk Organizer 

V2 Together.stl

A simple little ice scraper created as part of a 10 minute challenge: https://youtu.be/UORm2p7-Nhk

Ice Scrapper

scrapper end 1.stl

The 2nd creation as part of my 10-minute challenge series. https://youtu.be/AML2u7UbURs.
I got all my inspiration from this great design by 3Dizain here: https://www.thingiverse.com/thing:5021804

Hex Bit Storage Box Drill Hex Bits

Hex Box To Show.stl

A lovely little 3D printable Lock latch. Modelled in my 10 minute challenge video: https://youtu.be/EXaE5U13nwA

3D Printable Lock Latch

Latch Lock  All.stl

The scale point model that I use in all my photogrammetry scale "accurate" videos.
Youtube.com/makertales

Photogrammetry 10cm Scale Points

The layout of my new "clean shop" workspace where I'll have all my 3D printers and a lot more. Check out how I go to this end result in blender VR here: ( Video coming soon )

MT "Clean Shop" For Thangs AR

Cleanshop For Thangs.obj

floor_Cube.002

Door_Cube.009

celling.001_Cube.008

celling.002_Cube.029

floor.002_Cube.023

floor.003_Cube.025

floor.004_Cube.026

floor.005_Cube.027

floor.006_Cube.028

conduat_right_Cube.010

conduate_back_Cube.011

conduate_left_Cube.013

wash_and_cure_Cube.014

wash_and_cure.002_Cube.030

Cube.005_Cube.020

Cube.009_Cube.024

Mars_2_Pro_Cube

wash_and_cure.001_Cube.015

Matt_1_Cube.016

Matt_1.001_Cube.017

Matt_1.002_Cube.018

Matt_1.003_Cube.019

Ultra_sonic_Cube.021

trolly_Cylinder

air_filter_Cylinder.001

compresor_Cube.033

cr10_Cube.049

big_metal_selving_Cube.038

big_metal_selving.001_Cube.039

big_metal_selving.002_Cube.040

big_metal_selving.003_Cube.041

big_metal_selving.004_Cube.042

thin_metal_shelving_Cube.035

Matt_1.005_Cube.034

I encountered this very interesting Ring Latch Lock concept while looking through youtube and I had to have a go at recreating it for 3D printing using blender.

Here is the video with the full design process: https://youtu.be/CSvRUxEnF1A

Original video I got inspired from: https://bit.ly/2VeHmL7

Ring Latch Lock

This is the end result of the freeCAD crash course.

Youtube link coming soon.

freeCAD Crash Course End Result

Summary
A very quick remix of the brilliant design from HeyVye. : https://www.thingiverse.com/thing:4619937

Showcased in this video here: https://youtu.be/hm1IMs_NCfg

This design is currently functional but I'll probably revisit it in the future to give the rubber band just a little extra space. SO for the time being I'm going to say that it's a WIP.

Print Settings
Printer brand:
Creality


Printer:
CR-10S


Rafts:
No

Supports:
No

Resolution:
200

Infill:
20

Filament brand:
3DTomorrow


Filament color:
Aged Granite


Filament material:
PLA

Rubber Band Phone Clamp With A 200PL Quick Realise Plate

Phone_Grip_Rubber_Band_Remix.stl

Creative Maker learning, teaching and sharing my projects and creations.
Find me on YouTube, and see find a whole bunch of other tutorials & projects. 

[https://linktr.ee/makertales](https://linktr.ee/makertales)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships