It's important to follow the necessary inputs in order to print this model. Otherwise, errors may occur during printing. These settings are designed for Bambu Studio and PrusaSlicer. While they can work with other slicers, we recommend using these two to avoid potential issues.Settings With a 0.8mm nozzle: • 0.3 layer height. • 1mm Wall width. • Spiral vase ENABLED. • 4 bottom layers. With a 0.4mm nozzle: • 0.2 layer height. • 1mm Wall width. • Spiral vase ENABLED. • 6 bottom layers. Lunfa Craft Membership Plan