Simple Birdhouse

Birdhouse.3mf

loftbedfile.stl

 3D printed part to hold a rectangular piece of wood that is 6 1/2 by 9 1/4 by 1/2 inches. The hook is made to fit on a loft bed bar that is 1 inch. I would recommend drilling through the hole again so the edges are more refined. I wouldn't put something ridiculously heavy on it its meant more for the tissues, 1 book, maybe your alarm, ect. Light things that fit.

Mini Fridge

Ripstick Hook

This is a hook to hold your Ripsticks. I printed it with around 30% infill. You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can find related things on our channel: https://www.youtube.com/@workshoppop4709

Chair Bracket 

This bracket is designed to hold chairs. I printed it with 90 % zig zag infill. There is more info on our YouTube video: https://www.youtube.com/watch?v=kSf4YSCsYMM You can find other related things on our channel: https://www.youtube.com/@workshoppop4709

Mini Dining Chair

WARNING: NOT IN PROPORTION TO EITHER TABLE. 

Mini Couch

Dining Table

Mini Jail Cell

This is a small jail cell with a removable lid. It can be used to keep things such a phone, pencils, and anything you might want. It is 4 by 4 by 7 inches and has a 20 % infill on the bottom and lid and 100% on the jail posts.

Mini Bookshelf

You like bookshelf's? Here's a small version! They can hold small things. I use it told hold the organs that broke off of my tiny human model.

Art Decor sign

If you want some art decor then you can print this. I did it at 10% infill. Make sure to do supports for the letters otherwise it won't look as nice.

Mini Counter

This is a mini island that comes from a kitchen.

Tool set and drill French Kleet

This is a French cleat hook to hold your drill on a piece of wood to help you organize. You can find more info on our video: https://www.youtube.com/watch?v=kSf4YSCsYMM You can find other related things on our channel: https://www.youtube.com/@workshoppop4709

Scooter/Pogo stick Hook

I would do this around 50% infill maybe even 60% with it being cubic you need 2 to hold the scooters and/or pogo sticks. You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can find other related stuff in our channel: https://www.youtube.com/@workshoppop4709

Lawn chair Hook

This is a hook to hold your lawn chairs to help with organization. I would print it at the minimum a 55% infill with the pattern being gyroid. There is more info in our YouTube video: https://www.youtube.com/watch?v=te0NSUzcJkk&t=3s There are related things on our channel: https://www.youtube.com/@workshoppop4709

Longboard Hook 2.0

You need 2 of these in order to hold a longboard but printing 2 instead of having one print like the longboard hook 1.0 cuts down on the amount of filament you use and the time you spend printing. I did these with 30% cubic infill.  You can find out more in this video: https://www.youtube.com/watch?v=yZgYXUaoU4U You can see other related stuff on our channel https://www.youtube.com/@workshoppop4709

Longboard hook

This is a hook to hold a longboard or even just a skateboard so that way they aren't just lying around.

Mini Cubies

As you can see in the photos they are good at holding small things like erasers.

Fancy Table


This is a fancy table for you to print as a miniature to have around.  It's 6 by 3 by 2 inches. 

Luna Roberts

Achievements

Seedling

Debutant