Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3044078.

Updated:  Reloaded .stl file. Original was exported using inches instead of metric making the model super tiny.  Corrected the .stl file export in metric for correct model sizing.  Also refined the .3mf model to smooth out the model surfaces.  The .stl & .3mf files are of the same model just different file format.

I liked b3f3's raspberry Pi 3B mount design, but needed to attach a raspberry Pi already in a case designed by 0110-M-P (https://www.thingiverse.com/thing:922740).  My raspberry Pi was in the VESA version of 0110-M-P's case.  The mount attaches to 2020 extrusion via 4mm bolts+tnuts.


Raspberry Pi3B Horizontal 2020 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2598023.

This is a remix of the Filament Spool HDD Bearing Adapter created by Peaberry (https://www.thingiverse.com/thing:2052951) to be used with Peaberry's top mount spool holder bracket (http://www.thingiverse.com/thing:2054533).

I needed a hub adapters for filament spools with a 51mm & 57mm ID hubs.  The remixed hubs have the same 25mm diameter hole for the HDD bearing and similar in overall size as the original.

Also when trying to re-purpose a broken 1TB Seagate HDD, I realized the HDD bearing design was quite different from the one used with Peaberry's Filament Spool HDD Bearing Adapter.  My HDD bearing was press-fit directly to the HDD housing and wasn't mounted on a separate mount plate.

So I designed a HDD Bearing Adapter Plate as well to fit into Peaberry's top mount spool holder bracket design and use with my remixed hub adapters. The Adapter Plate fits snug into the top mount spool holder bracket center hole.  I didn't have to screw it down.

Filament Spool HDD Bearing Adaptor - Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3044071.

Remixed Space Explorer Planter with arms.  Also made the planter wall a little taller so it can hold more dirt.  I've also included a test ring so you can scale the planter diameter with the glass dome inner diameter. The arms should rotate freely after a bit of gentle nudging.

Space Explorer Planter w/ Arms

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2753373.

My kids got a Playmobil Children's Hospital playset for Xmas but didn't have enough crutches for the number of extra playmobil kids they had.  So using a caliper, I measured a crutch that came with the set and then modeled it.

The crutch dimensions are not exactly the same as the original, but it fits perfect for the playmobil kids.  You'll need to print with a brim and supports as shown in the second picture.  The model is very small.  I printed two at a time.

Now the my kids need extra foot casts now that they have extra crutches.  We'll see...

Playmobil Kid Crutches

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2767947.

Playmobil Chidren's Hospital only came with one IV bag (translucent blue).  My kids wanted another one of different color.  So I measured the original with calipers and modeled a similar one.

I used pink PLA, but natural/clear and/or red translucent would be better.

Playmobil Hospital IV-Bag

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3738962.

VESA 100 mount for a Netgear R7000 router.

Enables mounting router on back of LCD Monitor.  Saves desk space.

I swapped out the router middle antennae with an remote/extension wired antennae, so the middle antennae wasn't in the way of the HDMI cable and/or pointed excessively back towards the wall (taking up space).  This is optional.

A Netgear R7000 router has wall mount key holes set 120mm apart.  The mount matches the key hole spacing and allows for 5mm button head bolts to be screwed into the mount.  The mount holes may need to be reamed/drilled up to 4.5mm diameter so the 5mm bolts can self thread into the plastic.

Install the mount to the LCD monitor VESA holes using 4mm countersink/flush head bolts.  Then align & set the router onto the 5mm button head screws.

Netgear R7000 Router VESA100 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2767942.

Remix'ed peaberry's mounts per his suggestion.  Added 3mm mount hole w/ provisioning for a captured nut to hold the bed down against the mounts.  Using the mounts to hold stack of a 220mm alum. heated bed 24V, cork insulation, and an old PCB heated bed.  Total stack height ~10mm.  So the mounts are taller.  The heated bed should fit flush to top of mount.

Printed using PC filament.

Anycubic Delta Heatbed Mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LugaMagnus

Achievements

Seedling

Trailblazer