Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4549665.

This takes Thorinair's C270 housing and merges it with Sneaks Pi Camera articulation system. Sneaks articulation system is solid, rigid, and all around offers some great flexibility to getting an angle that you like.

I have a X aluminum end-cap that I also modded: 
https://www.thingiverse.com/thing:4549749

I've printed this in PLA and ABS and both seem to be a little bit small for my disassembled C270. If you increase it 4-5% it will fit fine. The screws might not, but a little double sided tape for cushion and the tight clam trap that happens with the front lid gets put on make it snug as bug.

I included the focus ring but no mods have been done to it--it fit fine for me without needing to scale it.

Your mileage may vary.

I won't call this the best mod of my life and if you wish to do better I just slammed it around in tinkercad:  https://www.tinkercad.com/things/hOBSN0PqlGy 

It works though and I like it quite a bit.

Note: you will need the ball joint and the rest of the parts from the Pi articulation system.

C270 Housing for Articulation

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4075948.

Marvel's Daredevil!

I heard a friend liked DD so I went looking for a bust. I couldn't find one easily or worthy so I decided to carve my own. The source material is from [yuyukame2000](https://sketchfab.com/3d-models/daredevil-mcoc-ab97ee144a834d02b488267e07b6ff20). 

* Planar sliced in Meshmixer.
* (re)Sculpted in Blender
* Added rocks & DD emboss
* IK added to rotate bust a bit (will revisit this to try and need less supports in the future.)

Daredevil Bust

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4302136.

Been looking for a fan that gave me some access to the nozzle. The Ultimate Cooler is a great shroud but it's huge and takes up a lot of room. I really enjoy the idea of these modular fan shroud clips and have been using the C-Shroud for a while but it doesn't quite reach the back of a print well. I think if someone were to flip the fan upside-down and use a clip on a Petsfang or Bullseye could be made w/o all the extra plate/headroom but that's a project for another day.

The original Vortex I took this from was workable. I just didn't like the thinness of the fan clip and wanted to make it a bit more modular for modular sake.

I use mainly a .6 nozzle and this was printed at .36 with a width of .6 -- you don't have to. I printed this on it's side with tree supports (image shows.) You don't have to. Make this work how you want to make it work. The bolt holes are the only real tolerance you'll find and you can force M3 6's into it. If you're into shrouds you probably already flex a bit in print finishing. Have at it.

Could it use further work. You betcha. We'll see if I circle back to do more, or if one of you do something more awesome. :D

I do PLA for the fan side mount and PETG for the bed side--if you print hot PLA will sag after time and you don't want that. Print PETG or better.

Will it be close to your sock? Yea. Will it matter? Probably not. Heat dissipation is fast off a heat cart and I use a e3d v6 volcano block and haven't glassed it yet.

Sidewinder 4020 Vortex Fan Shroud Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4549749.

Simple 2060 (or really just 2020) piece to fit the end cap of an aluminum rail. Using it to mount the Pi articulation system with my c270.

2060 / 2020 Rail Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4299815.

Got tired of grabbing the calipers and balancing them while demarking 120mm on my filament so--here's a 120mm block that you can slot your fil into for a quick and easy marking. If you also forget how to calculate your M92 the equation is on the side of it.

Or for the nitty-gritty: https://mattshub.com/blog/2017/04/19/extruder-calibration

Each notch on the side is also 10mm so you can get a pretty good guess of how far off you are as you are testing.

Highly recommend you calculate your esteps with each filament. You don't need to re-set your E value but you'll know how much to offset your flow, which is pretty darn helpful in getting qualitative prints from finicky fils.   ---yea I'm looking at you PETG..


EStepper Calibration Block (120mm)

A generalist with a design and technology background. What will I be doing next? Even I don't know. But I have fun and I share what I can.

**Fabrication:** 
- Artillery SX1 (heavily modified)
- Phrozen Mini 4k
- Elegoo Jupiter 6k
- CNC Prover 4019
- Vacuform

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Lord-of-Candy

Achievements

Seedling

Explorer

C270 Housing for Articulation

Daredevil Bust

Sidewinder 4020 Vortex Fan Shroud Remix

2060 / 2020 Rail Adapter

EStepper Calibration Block (120mm)