This is a Gridfinity 1x4 holder for Mitsubishi Uni drop pencil lead packs. The fitment is quite tight to allow for magnetic mounting to an angled surface like a drafting table.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax 

Gridfinity Mitsubishi Uni Lead Pack Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

You will have an easier time if you remove the pocket clip from the pencils.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Gridfinity Mitsubishi Uni Drop Pencil Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

An adapter that lets you put an SD card into a standard cassette case. Useful for tastefully digitizing your tapes. 

Works best with a 1GB SD card (if you can find them).

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Cassette Case SD Card Adapter

An adapter that lets you put an SD card into a standard cassette case. Useful for tastefully digitizing your tapes. 

Works best with a 1GB SD card (if you can find them).

This is a jig for drilling centered holes in pennies using a drill press. The anchored version is compatible with most harbor freight drill presses. If you find that it will not fit into the anchor slotting on your drill press use the “no_anchor” STL and use clamps instead.



https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Penny Washer Jig

penny_washer_jig_anchored.stl

This is a utility part to assist in perfect zeroing your X and Y axis on an AtomStack A5 M40.

You will need to do a couple of modifications to the laser chassis while installing this. See pictures for details of the steps below:

1. Move the belt retaining T-nut on the left side up to the 10 graduation printed on the extrusion
2. Fold the belt down if there is excess
3. Remove the axis end stop, this part will replace it, remove the two frame screws, align the part, and screw them back in
4. Verify that the zeroing is correct by pushing the laser module into the notch on the zeroing block

https://doslabelectronics.com/

 https://ko-fi.com/mrcbax

AtomStack A5 M40 Zeroing Block

This is a utility part to assist in perfect zeroing your X and Y axis on an AtomStack A5 M40.

You will need to do a couple of modifications to the laser chassis while installing this. See pictures for details of the steps below:

1. Move the belt retaining T-nut on the left side up to the 10 graduation printed on the extrusion
2. Fold the belt down if there is excess
3. Remove the axis end stop, this part will replace it, remove the two frame screws, align the part, and screw them back in
4. Verify that the zeroing is correct by pushing the laser module into the notch on the zeroing block

https://doslabelectronics.com/

 https://github.com/LogoiLab

A template to drill the required holes to perform a shelby drop on a vintage Ford Mustang.

Arrow points towards front of vehicle.

If you don't know what this is for, you probably don't need it.

This part was created based off of documentation found online. I am not responsible for your use of this item or the damage that might be caused by its use (improper or not).

https://doslabelectronics.com/
https://github.com/LogoiLab

1964-66 Ford Mustang Shelby Drop Template

A template to drill the required holes to perform a shelby drop on a vintage Ford Mustang.

Arrow points towards front of vehicle.

If you don't know what this is for, you probably don't need it.

Customize the number of drives per row and number of rows using the provided SCAD file.

Tested with a variety SSDs and hard drives, but still may not work with some drives depending on their thickness.

https://doslabelectronics.com/
https://github.com/LogoiLab

Parametric 2.5" SATA Drive Organizer "Backplane Style"

Customize the number of drives per row and number of rows using the provided SCAD file.

Tested with a variety SSDs and hard drives, but still may not work with some drives depending on their thickness.

A gridfinity based syringe stand that can support 5-35cc syringes of various sizes with or without their needles. Use the SCAD files to parameterize your print.

The base has a shallow recess to collect any accidental drips for easy cleaning. I have left the outer gridfinity flange on the base as a safety measure in case the syringe completely leaks out.

The holder ring on the stand has integral supports for better printing without support material. These double as holes to store most spare luer lock based needles and applicators.

I use this for my 10cc Amtech flux syringes.

The holder STL is for 15mm diameter syringes with a need+barrel length of 110mm. The base STL is interchangeable.

The holder portion can take some force to press into the base as it has press-fit latching notches.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

Parametric Gridfinity Syringe Stand 

gridfinity_syringe_holder_base.stl

This is a PCIe bracket for Intel XF SR based networking cards. These are similar to the Intel X520 but use XFP/QSFP+

List of compatible devices:
- Intel XF SR 10Gbe
- IBM  5772

This may work with other Intel 10Gbe XFP based cards but has only been tested with the above listed devices.

The SCAD file allows for the choice of upper and lower port as well as dual port models.

Because of the tolerances of this part designed to work on multiple types of printers, the screw holes may be tight and will need to be stretched, this is fairly simple to do, it can be done using any pointed object of the correct diameter. The screw holes were designed to fit over-tight to hold the card firmly and to support the use of different types of screws. If you are having issues, the SCAD file is available for you to modify the screw hole radius.

more info about these can be found here: https://www.intel.com/content/www/us/en/products/docs/network-io/ethernet/network-adapters/10-gigabit-xf-server-adapters-brief.html

https://doslabelectronics.com/
https://github.com/LogoiLab

Parametric Intel XF SR PCIe Bracket

intel_xf_sr_pci_bracket_dualport.stl

This is similar to other parametric models, but this is OpenSCAD based.

Turns out its hard to fit a grid of a different dimension inside another grid of a different dimension reliably without relative alignment. But it's been done, so here you go.

This is a gridfinity 1x2 with 2x3 tray routes for six total trays.

There is also a lid that can be printed should you want to keep your parts contained and separated.

~If I find a bigger use for this I will fix the code to be properly parametric.~ It has been done.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax


Parametric Gridfinity Small Parts Containment Tray 

gridfinity_small_parts_containment.stl

gridfinity_small_parts_containment_lid.stl

gridfinity_syringe_holder_stand.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LogoiLab

Achievements

Seedling

Fan Favorite

Voyager

Pinned models

Parametric Gridfinity Small Parts Containment Tray

Parametric Gridfinity Syringe Stand

Gridfinity Mitsubishi Uni Drop Pencil Holder

Gridfinity Mitsubishi Uni Lead Pack Holder

Gridfinity Mitsubishi Uni Drop Pencil Holder

Cassette Case SD Card Adapter

Penny Washer Jig

AtomStack A5 M40 Zeroing Block

1964-66 Ford Mustang Shelby Drop Template

Parametric 2.5" SATA Drive Organizer "Backplane Style"

Parametric Gridfinity Syringe Stand

Parametric Intel XF SR PCIe Bracket

Parametric Gridfinity Small Parts Containment Tray