Test Tube Propagation Mount - Inverted
An inverted version of the test tube propagation mount.
3 different versions:
- Small (screw mounted)
- Full length (screw mounted)
- Full length (command strip mounted)
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the test tube, the screw holes are designed specifically for #8-10 x 1 in anchors and screws, and the command strip mount is the exact size of a regular large command strip.
Orientation The mounts should be upside down and the cleat should have the longer side facing down.
Print Settings .2mm layer height 15% grid infill 2 walls Monotonic top and bottom surface pattern
Filament & Hardware Filament I used for this print: Hatchbox Matte Ash Gray PLA Overture Matte Light Brown PLA Test tubes Hardware: #8-10 x 1 in anchors and screws Command Large Refill Adhesive Strips
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/
Test Tube Propagation Mount - Inverted
Propagation Mount for The Rail
Dovetail Mount for IKEA SKADIS
Half Dome Wall Planter
Square Bubbles Planter
Plastic Bag Dispenser
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
What size test tube do you use with this?
I posted a link here for the ones I found to fit.
Would this work on the Rail v2 dovetail like the others?
Here is the link to the ones I found on Amazon that fit. https://www.amazon.com/gp/product/B011M30NIM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
is there a reason why I can't download the STL version?