Spiral patterns like this have been done before, but this one has a twist off drip tray! There are two sizes (2.75" and 4.5") included for both wall mounted and tabletop versions. You can fit 3 small ones on a build plate including the wall mounts. The 4.5" pot and tray just BARELY fits on a 256x256x256 mm build plate. I've included the .3mf so you don't have to try to fit them yourself, but you could always just print the 4.5" pot and tray separately if you have a smaller printer.
Reminder that the Command Strip wall mount is designed for Command Medium Picture Hanging Strips (the velcro ones). The link to buy them is in my Amazon Storefront linked at the bottom.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware
- Filament: Overture Matte Light Brown PLA
- Command Medium Picture Hanging Strips
- #10-12 x 1-1/4 in anchors and screws
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/