tracking pixel
Brian H

Big Bubbles Planter

by
LoftedGoods
Follow
Follow
Remix Model
Moffe
Moffe
|
|
Image 8 of 10
Big Bubbles Planter - Why do I get this weird seam outside - 3d model
Moffe
Moffe
|
|
Image 8 of 10
Big Bubbles Planter - Why do I get this weird seam outside - 3d model
2D
3D
Makes
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter 3d model
Big Bubbles Planter - Why do I get this weird seam outside - 3d model
Big Bubbles Planter - Why do I get this weird seam outside? - 3d model
Big Bubbles Planter - Why do I get this weird seam outside? - 3d model
This model is restricted by licensing terms. 
108 Likes1.2K DownloadsNovember 11, 2023
This model is restricted by licensing terms. 


This is how I originally designed the Poppy, and I'm bringing it back! It uses the same mounts as all my other wall mounted planters.

Supports None needed!

Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

Print Settings .2mm layer height 15% grid infill. I've been using gyroid for the 4.5" command mount and it's much cleaner. 2 walls

Filament & Hardware Filament I used for this print: Polymaker Matte Marble PLA Hardware: #10-12 x 1-1/4 in screws

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/


108 Likes1.2K DownloadsNovember 11, 2023




This model is restricted by licensing terms. 
108 Likes1.2K DownloadsNovember 11, 2023
This model is restricted by licensing terms.