Basketweave Planter

1.3K downloads · 2 years ago · We've been experimenting with a bunch of different patterns for these planters lately, and I think t

This model is restricted by licensing terms.

View license.

Description

We've been experimenting with a bunch of different patterns for these planters lately, and I think this is my new favorite! These can mount to your wall using command strips or screws and feature a hidden, twist off drip tray.

Supports None needed!

Scaling I wouldn't recommend scaling the wall mounted versions since they perfectly fits the Command Strips or #8 - #10 x 1" screws and anchors. The tabletop versions can be scaled however you like.

Orientation

Everything prints upright with its bottom on the build plate
The wall mount prints flat with the sliding dovetail facing up

Print Settings

.2mm layer height
15% grid infill | 15% gyroid infill for wall mount
2 walls
Set bridge flow to 1.6 for drip tray and wall mount

Filament

Bambu Lab Matte PLA

Colors I used:

Latte Brown

Hardware

#8 - #10 x 1" screws and anchors
3M Medium Picture Hanging Command Strips

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tags:

Discussions

Matronryan2 years ago

This is a small thing but in the uk it seems the pots that go into the 4.5" are higher than the depth of the printed pot - anyone else have that?

Matronryan2 years ago

ANyone else get the following Bambu Studio error message "Due to the lower version of Bambu Studio, this 3mf file cannot be fully loaded. Please update BambuStudio to the latest version" Thing is I have the latest version

andrek2 years ago

I agree with the previous comment. This is the first planter with a twist design that has a tolerance issue. It is too loosely fitting and when twisted in leaves a visible gap, so it isn't as well hidden as it could. Hopefully this model can be fixed :) Otherwise design is awesome

kevincusack2 years ago

Love the design - is there a way to make the tolerances on the trays a bit tighter? They're very loose and sometimes if I pick up a planter quick enough, it's enough to make the tray come loose and fall off.

bool2 years ago

I can't find Bambu Lab Light Brown Matte PLA. Is this the same filament as Bambu Lab LATTE Brown matte PLA? Thanks!