🌙 Night Owl – HueForge Bookmark Edition Mysterious. Minimal. Mesmerizing.

This was the first bookmark I designed in HueForge — and it’s still one of the most loved. The Night Owl sits perched beneath a quiet moon, with just enough detail to pull you in, but not so much that it loses its elegant simplicity.

📐 Model Details: Size: 42 mm x 145 mm Layer Height: 0.08 mm Infill: 100% (required for clean color contrast) Supports: None Brim: Optional but recommended for better adhesion Base Layer: 0.16 mm

🎨 Filaments Used (4 colors): Black – BambuLab Basic Black (TD: 0.3) Dark Blue – BambuLab Basic Blue (TD: 5) Pink – BambuLab Basic Pink (TD: 8) White – BambuLab Basic Jade White (TD: 5)

⏸️ Manual Color Change Instructions: This model is fully AMS-free when using the alternate print profile with pause layers. Use the following filament swap points:

Start with Black At Layer #8 (0.72mm): Switch to Blue At Layer #13 (1.12mm): Switch to Pink At Layer #20 (1.68mm): Switch to White ✅ No AMS or multi-material system needed — just pause and swap.

📦 Includes:

AMS profile (standard) AMS-free manual pause version HueForge depth-optimized STL Previews & photo examples Thanks for scrolling all the way down — you’re officially a real one 🫶 Your support makes this possible and keeps creators like me designing through midnight prints and caffeine crashes.

💛 Want to support more? buymeacoffee.com/lilith3dprint