A collection of the cutest, spookiest little pixies you ever did see!

*Gothic window stand is not included* 

Spooky Pixies

**This release includes:**

🐉 RubiKuro dragon
🐉 2 Prepainted RubiKuro 3MF files
🐉 Rubi Egg

RubiKuro was tested down to as little as 50%, however I dont recommend going below 60% scale. Prints without supports. The large gradient Rubi in the pictures is approx 135% scale. I recommend using minimum 3 walls, and if you sometimes have adhesion issues I recommend using a brim with a brim gap between 0.3-0.6 mm, especially when printing in multicolor.

**Egg**
I have heard and took into consideration the concerns that were brought to my attention with Kaida's egg. I have made a few changes to this egg design, the egg is wider at the base which allows a dragon to fit much more comfortably! I have also made the tabs on the top a bit shorter to allow for easier opening and closing. Having a looser fitting top introduces a chance of the top coming off when shaking the egg upside down hard enough, it should however stay closed when flipped upside down, and with regular use. The Egg and Rubi are 1:1 scale, this means that 100% Rubi will fit into 100% egg. Egg prints without supports.

If you are using Bambu slicer I recommend using Arachne for your wall generator, this will ensure that there is an even number of walls on the egg.

When placing Rubi into the egg: It doesn't particularly matter which end you place in first, as long as you coil her up, then place the top over in line with the tabs and give a gentle shake, the top should snap in place easily. You can also place Rubi into the top of the egg, and bring the top down into the bottom. I have made a short clip of how to place Rubi into her egg, linked below

**Filaments used:**
Blue and Pink Rubi: Polymaker PLA Ice, Ziro Matte Pink, Polylite PLA Pro Metallic Magenta, Ziro PLA pro Snow white

Black, blue, red Rubi:  Ziro Gradient Twinkling PLA, Cookiecad Pale Blue Elixir PLA, Cookiecad Ruby Red Elixir PLA, Cookiecad Sloar Flare PLA.

Grey and pink Rubi: Polyterra PLA Fossil Grey, Cookiecad Pixie Dust PLA, Hatchbox sparkling grey.

Yellow pink gradient Rubi: Ziro Matte gradient sunlit Petal, Polylite PLA Starlight Mercury.

Large gradient Rubi: Eryone Matte Marcron Rainbow

I think that's all! If you have any questions please let me know!! 
----------------------

Rubikuro and Egg

Rubikuro_3mf_3color.3mf

Rubikuro_3mf.3mf

Rubi_Egg_Bottom.stl

Rubi_Egg_Top.stl

Rubikuro.stl

Meet Kaida the little dragon and her egg!

This release includes:
🐉 Kaida
🐉 4 color prepainted 3MF
🐉 2 color prepainted 3MF
🐉 Kaida's Egg
🐉 Filament and 3MF illustrated guides

I have included a guide on how to edit the colors of the 3MF where possible. The only one I believe I didn't include was the single color rainbow which was printed in Eryone matte watercolor PLA

This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon https://www.patreon.com/Layersingreen

Printed model is not suitable to be handled by children under 3 without supervision

Check out my kitty flexi design: https://cults3d.com/en/3d-model/art/kitty-flexi

3D printing settings
Kaida was tested down to 50% however I don't recommend going lower than 80% I have also printed it at 145% which is the single color rainbow in the pictures! I loved her at that size! The egg should not be scaled down, due to the thin walls!

There are two 3MF files, one for a more complex 4 color paint, the other is a simple 2 color paint.

100% Kaida fits into 100% egg, all the multi color prints from above are all 100% including eggs. The fit is tight and you will need to arrange her into a certain position to make her fit and close the egg. The top of the egg functions by gently squeezing it to fit the pegs into their spots on the bottom section. Please refer to this quick video to see how I place Kaida in her egg

--> youtube.com/shorts/qDkEZ7a8zXY

None of the files in this release need supports to print! I do however strongly recommend using a brim when printing Kaida! especially so when printing in multicolor. And as always 3 walls is also strongly recommended

Kaida and Egg

Kaida.stl

Kaida_2color_3MF.3mf

Kaida_4color_3MF.3mf

KaidaEgg_Bottom.stl

KaidaEgg_top.stl

Bat pixie includes a keychain version, as well as a prepainted 3MF. Tested down to 50% however I don't recommend going below 80%. The large pink and purple bat is 250% and I gave it a very quick hand painting with some easy dry brushing and painting the eyes.

Please make sure that when you are editing the 3MF that you are NOT painting the eyes or the wings with the paint tool. They are split to objects and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel.

also if you are using bambu studio please make sure you are double checking your profiles as the 3MF will load a default A1 mini plate.

I recommend using a brim due to the small adhesion area of the arms, I use a brim gap of 0.5 mm to make sure the brim peels smoothly.

As with all of my flexi releases I do not recommend printed models to be handled by children under 3 without supervision

This model is for PERSONAL USE ONLY, if you want a commercial license and access to more awesome models you can get it on my patreon

https://www.patreon.com/Layersingreen

Bat Pixie

Bat_pixie.stl

Bat_pixie_3mf.3mf

Bat_pixie_Keychain.stl

Yuna is really fun to handle and have her curl up in the palm of your hand! Everything that is included in today's release:

🦊Yuna Flexi
🦊Yuna 3MF
🦊Yuna Straight version and 3MF

Yuna was tested down to 50% however I don't recommend going smaller than 70%. I found the arms to stick a bit at that scale, wiggling back and forth helps get them loose again!

I included a straight position version so that more of them can be fitting onto the plate! This is helpful when printing the 3MF files as you get more prints for the same amount of waste, it is also helpful when you'd like to push more gradient changes from a gradient filament.

Please make sure that when you are editing the 3MF that you are NOT painting the eyes the ears with the paint tool. They are split to parts and painting them will create uneven paint lines. Instead please assign color to them from object list located in the left side panel.

Also if you are using bambu studio please make sure you are double checking your profiles as the 3MF will load a default A1 mini plate and settings.

Filaments used:

Red Yuna: Isanmate red orange matte gradient, Hatchbox Sparkle Grey, Ziro white pro

Grey Yuna: CookieCad Gray Ombré, CookieCad Pale Pink Elixir, Hatchbox Sparkle Black

Blue and Pink Yuna: Cookiecad Blue Ombré, Ziro Twinkling-pink, CookieCad Lavender Chip Marble, Ziro Starry Sky

As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision.  

Yuna

Yuna_3MF.3mf

Yuna_straight.stl

Yuna.stl

Yuna_straight_3MF.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Layersingreen

Achievements

Sequoia

Pinned models

Rubikuro and Egg

Kaida and Egg

Bat Pixie

Yuna

Spooky Pixies