Hiii!!

I'm excited to share this Collaboration with Meliora3d!! Make sure to check them out as they have a ton of fun flexi and vending machine designs!

Tiny vending machine

• 0.2 Layer Height, 3 walls, 15% Gyroid Infill

• Brim recommended

• Tree support “as needed”

I got my capsules from Amazon! for 100% scale vending machine you will need 1.1 inch capsules!

I found that I was able to print without supports with minor after printing clean up on the tumbler bar. If you are finding that it is not printing well without make sure to add tree supports!

the tabs under the arch on the top section of the base will need to be clipped off after printing.

Mini Sculpts

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• Printing the mini sculpts with 0.16 layer height or lower will improve quality

Editing 3MF

Avoid using the slicer's fill tool when coloring eyes, and eye shines in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects. The rest of the parts can be painted using the fill tool and toggling the smart fill angle.

Eye shine objects can be right clicked from the object list and deleted.

Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

The sculpts are very very small in order for them to fit into the 1.1 capsules, I don't recommend these for small children.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ + + 📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌