Its June!! Yaay!! Gosh time is flying by!

This pixie was a very special request from a long time subscriber! It's got a little shell that snaps into its back! I hope you guys like it!

The Daisy Pixie is not included in this release I just though they made a great team! It can be downloaded free from the subscriber exclusives ☺️🐞

🌸 Lady bug Pixie 🌸

• 3 walls, 15% gyroid or 3D honeycomb infill, no supports

• I don't recommend going below 100% scale

• The pins should be tight fitting, if they are not fitting or fitting loosely, I recommend increasing or decreasing in tolerance by scaling up or down by 0.5% to ensure correct fitting.

• Glue can be used in the holes to ensure it does not come apart

Editing 3MF

• The 3mf models are split to parts. All the parts are located in the object list on the side panel. It is best not to color the objects manually using the fill tool and instead assign color to them from the object list to make the edges look cleaner. If a part you wish to color isn't on the object list, then you can use the fill tool to color it. Do not split to objects.

• Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐

I do not use AI in ANY part of my design process. All of my designs are human made™ ✌️

📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌