STEP ONE: NAVIGATE TO “MAKERLAB” ON MAKERWORLD.COM

STEP 2: SCROLL UNTIL YOU SEE “MAKE MY LITHOPHANE” AND SELECT IT

STEP 3: SELECT “CREATE FROM BLANK”

STEP 4: SCROLL UNTIL YOU SEE “COLORFUL LITHO WITHOUT FRAME” SELECT IT

STEP 5: SELECT “PICK IMAGE”

STEP 6: FIND YOUR IMAGE, SELECT “OPEN”

STEP 7: UNDER “SIZE” ADJUST WIDTH TO 102MM, THIS SHOULD SET THE HEIGHT AROUND 116MM-118MM

STEP 8: UNDER “ATTRIBUTE” ADJUST “MARGIN” & “MARGIN THICKNESS” TO THE LOWEST POSSIBLE VALUES

STEP 9: IN THE “IMAGE” TAB USE THE SLIDERS TO MAKE YOUR IMAGE LOOK THE WAY YOU WANT IT TO (not pictured)

STEP 10: SELECT “EXPORT” IN THE TOP RIGHT, THEN SELECT YOUR PRINTER AND NOZZLE SIZE. WAIT FOR MODEL GENERATION.