**Description**
I designed this stand for the Samsung Galaxy Watch 4 Charger. The model prints “face-down” with some supports. 

**Instructions**
Put the usb cable through the hole in the front and push the charging pad into the socket. The cable can be routed at the back and comes out at the side of the stand. (See photos)

**Filaments used:**
- JAYO PLA+ black
- Bamboo Lab Blue Grey 10602
- Polyterra Cotton White

Samsung Galaxy Watch Charger Holder

samsung watch charger stand v1 - bamboo lab.3mf

**Description**
This is a holder that I made that can hold up to 20 nespresso capsules. I made 2 variations of it:

- one with holes for magnets so you can stick it to a fridge
- second one without the holes so you can use a double-sided tape to stick it anywhere in the kitchen.
 

The option with magnets has 6 holes for 6 x 2 mm magnets and 9 holes for 8 x 3 mm magnets but as you can see on the picture it will work perfectly with less. The magnets need to be pushed in into the dedicated sockets.


**Filaments used:**
Polyterra PLA Cotton White

 

**Other parts:**
Magnets 6 x 2 mm - https://www.amazon.nl/dp/B09H34QS6C?ref=ppx_yo2ov_dt_b_fed_asin_title

Magnets 8 x 3 mm - https://www.bol.com/nl/nl/p/magneet-o8-x-3mm-10-stuks/9200000098123962/

Nespresso capsules holder

nespresso capsule holder v1 - magnets.stl

I made this slider to keep track of the status of the dishes inside of our dishwasher (green - clean | red - dirty). The model consists of 6 pieces and is assembled with magnets. There are 12 magnets in total. The colored squres are replaceable so you can change them anytime you want for other colors. The whole model is printed face down so that the all elemtens have the texture of the plate you are ptinting on.

This is my first ever model, I hope it will be usefeul for someone.
 

**Instructions**:
Push magnets into the slots on each of the 3 main pieces. Keep in mind the orientation of the magnets.

The color squares need to be place in the slit of piece #2 and snaped onto the piece #1.

Place the slider part into the slit of piece #3. This one is not a square so watch out for the orientation, Then snap that part to the rest of the pieces.
 


**Filaments used**:
Polyterra PLA Cotton White
Bambu Lab PLA Matte Scarlet Red (11200)
Bambu Lab PLA Matte Grass Green (11500)
Polyterra PLA Lavender Purple
Jayo PLA+ Black

 

**Other parts**:
Magnets, 6 mm x 2 mm - https://www.amazon.nl/-/en/dp/B09H34QS6C?ref=ppx_yo2ov_dt_b_fed_asin_title

Dishwasher status slider, magnetic

dishwasher_slider_v1.3mf

samsung+watch+charger+stand+v1.stl

Trying to fix stuff with 3d printing - one project at a time!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Kroopniock

Achievements

Seedling

Pinned models

Samsung Galaxy Watch Charger Holder

Samsung Galaxy Watch Charger Holder

Nespresso capsules holder

Dishwasher status slider, magnetic