**🏷️ SPECIAL OFFER 🏷️ Use the code HALFPRICE and get a 50% discount on my [membership plan](https://than.gs/u/1558026?plans=true) for 2 months!**

This is keychain shaped like a yarn ball with a built-in screw thread. It opens to store small items.

**No supports**

**Package includes:**
- Yarn ball with keychain loop
- Yarn ball without keychain loop

By putting some rustling pieces inside, you can also use it as a cat toy 😸

Follow us here on [Thangs](https://thangs.com/designer/KrakDrag) and on [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on upcoming designs!

This is a FREE model, but only my supporters are legally allowed to sell prints of my designs.

Happy printing and share your yarn ball! 

**3D printing settings:**
- Print model in provided orientation
- No Supports
- 0.12[mm] layer height
- 2 walls
- 20[%] infill
- For better bed adhesion you can use outer brim, but it's not necessary

Yarn Ball: Container keychain 

Yarn_keychain_nut_krakdrag.stl

This are universal corner braces which you can mount on your strap clamp to glue together octagons and hexagons.

Package includes:
- set for hexagons
- set for octagons

3D PRINTING SETTINGS
- Can be printed with thick layers to increase speed of printing.
- small amount of supports needed.

Strap Clamp Octagon & Hexagon Corner Braces

hexagon corner brace ( print 5 pieces).STL

You can use FeatherBoards in many places. For example for table saw or router table. They are great tool witch improving safety and quality of your work.

Two types of Feather boards in package:

- With two slots
- Universal one with one slot, two mounting holes and two m6 holes
+ two types of knobs to use with them:

M6 knob with 24mm diammeter
M8 knob with 40mm diammeter

Featherboard With Knobs

feather board 2.STL

1. Each month, you'll be able to choose **up to 4 items** from 'KrakDrag" digital files collection.

2. **Early access** to new models. 

3. Commercial license:
- All patrons who hold Tier:"Vip access/Print seller" **active** on Thangs, will be allowed to sell physical 3D prints of **ANY** KrakDrag designs.
- Please, make sure to include this in your item description:
" Licensed seller of KrakDrag designs: [your Thangs ID]".
- 'KrakDrag' Digital files are NEVER to be modified, resold, shared, or redistributed in any form.




Vip access/Print seller

Let the kitty hug your drink! This is mostly print-in-place, self-adjusting coaster,  that needs **NO supports**. 
[**CHECK QUICK DEMO VIDEO** ](https://youtu.be/SgHZKJepiLg)
**”Mostly” because mechanism and body are Print in place**, the only printed separately part is the round pad, which you need just put on top of the cat body. 

Clearance between moving parts is very big, so every printer should print this design without any problem.

**The Cat coaster automatically adjusts to the size of the object**, it can grip both a large mug and a standard aluminum can.

**Follow us** here on [Thangs]( https://thangs.com/designer/KrakDrag) and on [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on upcoming designs! 

Happy printing and share your new coaster!

**3D Printing settings:**

- No Supports
- Moslty print-in-place (pad is printed separetely)
- 4-3 walls (0.4-0.6[mm] nozzle) 
- 50[%] infill (More material in cat paws = better mechanism retraction)
- For using with hot drinks I suggest use additional thin cork pad or print “pad” file with a heat resistance material.

Cute Cat Mug Hugger: Self-Adjusting Coaster

STL_articulated_cat_coaster_pad.STL

3MF_articulated_cat_coaster.3MF

STL_articulated_cat_coaster_main.STL

Let the Kitty organize your books! This is Hanging Cat! An adjustable book nook that can extend in width, ensuring a perfect fit for any bookshelf. 

Also check my new [🦉 Flying Owl 🦉 Adjustable Book Nook!  ](https://than.gs/m/1106089)

**Print-in-Place and No supports!** 

The cat can extend his arms from 70[mm] to 105[mm] (approximately 2.75 inches to 4.13 inches) 

The built-in ratchet mechanism ensures that the set position is maintained.

Follow us here on [Thangs](https://thangs.com/designer/KrakDrag) and on [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on upcoming designs!

To legally sell PRINTS of my designs, you can obtain authorization by joining my Thangs [Membership](https://than.gs/u/1558026?plans=true)

Happy printing and share your new book guardian!

3D printing settings:
- No Supports
- Print-In-Place
- 3 walls for 0.4[mm] nozzle 
- 20[%] infill  


Hanging Cat: Adjustable Book Nook

Hanging Cat Adjustable Book Nook.stl

Let the Owl organize your books! This is Flying Owl! An adjustable book nook that can extend in width, ensuring a perfect fit for any bookshelf. 

**Print-in-Place and No supports!** 

The owl can extend her wings from 70[mm] to 105[mm] = approximately 2.75 inches to 4.13 inches

Dept extenders: After printing, simply rotate the side extenders 90 degrees and snap them into place.([Check video](https://www.instagram.com/reel/C9sSLKrtbFm/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==)) 

**The built-in ratchet mechanism ensures that the set position is maintained.**

Follow us here on [Thangs](https://thangs.com/designer/KrakDrag) and on [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on upcoming designs!

**To legally sell PRINTS** of my designs, you can obtain authorization by joining my: [Membership](https://tinyurl.com/KrakDragMembership) 

Happy printing and share your new book guardian!

**Update 26.07.2024:**
🎨 Added colored 3MF files for Bambu/Prusa printers, two versions:
- With colored eyes, beak, and claws
- Above, plus a frame in a different color than the owl

3D printing settings:
- No Supports
- Print-In-Place
- 3 walls for 0.4[mm] nozzle
- 20[%] infill

Flying Owl: Adjustable Book Nook

3MF-Flying-Owl-Adjustable-Book-Nook-KrakDrag_colored_type_1.3mf

3MF-Flying-Owl-Adjustable-Book-Nook-KrakDrag_colored_type_2.3mf

STL-Flying-Owl-Adjustable-Book-Nook-KrakDrag.stl

**Let the Cardboard Crew watch your pens!**

Meet the Cardboard Crew: Modular Desk Organizer with **6 Print-In-Place characters**,  Arrange them however you like on a **snap-fit modular base**.

**Each character opens its eye when you insert a pen and closes it when you remove the pen!**

**No supports!**

**Package includes:**

- 6 characters: 3 boys and 3 girls
- A snap-fit modular base, allowing you to create a single or double-rowed base as long as you need!

The Crew is compatible with most writing instruments – all up to 12mm (0.47 inches) in diameter.

🎨**Includes colored 3MF** files compatible with Bambu, Prusa, and Anycubic printers.

Follow us on [Thangs](https://thangs.com/designer/KrakDrag) and [Instagram](https://www.instagram.com/krakdrag3d/) to stay updated on new designs!

Want to sell PRINTS of my designs legally? Join my [membership](https://than.gs/u/1558026?plans=true) to get authorized!

Happy printing, and don't forget to share your new desk companion!

3D printign settings:
- No supports
- 2 walls for 0.4[mm] nozzle
- 15% infill for characters and 10% for bases

KrakDrag

Achievements

Seedling

Fan Favorite

Shooting Star

Trailblazer

Pinned models