Single Snap (DS Part A) - Medium Command Strip Mount

This is a "Medium" Command Strip Mount that specifically uses 3M Medium Picture Hanging Command Strips and creates an 8 mm offset from the surface.

If your Tiles are smaller than a 6x6, then use the Small Command Strip Mounts.

This is a “Double-Sided Part A” piece, so it can be secured into place using a Single Snap (DS Part B). It can also be secured using 10 mm Mid Thread Bolts.

This mount comes with top and bottom versions that are placed at the top or bottom corners of your board.

Get the 3M Medium Command Strips here: https://geni.us/odrk (By purchasing through this referral link, I earn a commission at no extra cost to you).

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use yourprinter'ss default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io