#3DPNSpeakerCover 

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Pin Hole is a random design I created as my second ever fusion 360 creation. definitely was some room for improvement as hopefully shown in my later designs. 

As always, Good Luck, High Five all around, and Happy Printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-ThePinhole.stl

#3DPNSpeakerCover 

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Hobbit V2 is a opening speaker cover design with a top speaker cover addition in the shape of a window, created for fans of the JRR Tolkien series of novels. It has a door and a lock as well as it opens and closes.

As always, Good Luck, High Five all around, and Happy Printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheHobbitv2.stl

#3DPNSpeakerCover 

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Hobbit is a opening speaker cover design, created for fans of the JRR Tolkien series of novels. It has a door and a lock as well as it opens and closes.

As always, Good Luck, High Five all around, and Happy Printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-The Hobbit.stl

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Ball Arm is a modified version of the Arm system that incorporates 2 balls for mounting things with truly endless possibilities. You can mount this to your speakers as an additional way of having your camera or Go Pro for taking videos/pictures, or you can use the base as just a speaker cover. You can also use this as a base to mount the system to a desk or another place.  

The Arm's Base is not only a general speaker cover, but a base for a ball style mounting system, giving the user another way of printing and mounting their Go Pro or Camera, while only needing a few pieces of hardware to complete the set. 

There are 12 printable pieces for the current selection of parts  for the mounting system.

Needed parts include:
2 ) - 2.75" Long 1/4" diameter bolt
2 ) - 1/4" Nuts (Ideally Wingnut)
1 ) - Camera mounting bolt (For Camera Mount)
1 ) - Standard Go Pro Screw (For Go Pro Mount)
1 ) - Standard Go Pro Nut (For Go Pro Mount)  

If you decide to print this, I would love to see the results as I don't have a printer yet and would love to see my designs become reality. Thanks!

As always, Good Luck, High Fives all around, and Happy Printing!

Jonathan

Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 

#3DPNSpeakerCover-TheBallArm.stl

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Slice is a Minimalist (long) design that is modular so you can print as much or little as you want or need.

As always, Good Luck, High Fives all around, and Happy Printing!

-Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheSlice.stl

#3DPNSpeakerCover

The Slice is a Minimalist (long) design that is modular so you can print as much or little as you want or need.

As always, Good Luck, High Fives all around, and Happy Printing!

-Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Minimalist (Short) is a modular speaker cover design . You can print as many as you want or as little as you want. 

As always, Good Luck, High fives all around, and Happy Printing!

Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Minimalist(Short).stl

#3DPNSpeakerCover

The Minimalist (Short) is a modular speaker cover design . You can print as many as you want or as little as you want. 

As always, Good Luck, High fives all around, and Happy Printing!

Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Arm is a combination system for mounting things with endless possibilities. You can mount this to your speakers as an additional way of having your camera or Go Pro for taking videos/pictures, or you can use the base as just a speaker cover. You can also use this as a base to mount the system to a desk or another place.  

The Arm's Base is not only a general speaker cover, but a base for a ball style mounting system, giving the user another way of printing and mounting their Go Pro or Camera, while only needing a few pieces of hardware to complete the set. 

There are 11 printable pieces for the current selection of parts  for the mounting system.

Needed parts include:
1 ) - 2.75" Long 1/4" diameter bolt
1 ) - 2" Long 1/4" diameter bolt 
2 ) - 1/4" Nuts (Ideally Wingnut)
1 ) - Camera mounting bolt (For Camera Mount)
1 ) - Standard Go Pro Screw (For Go Pro Mount)
1 ) - Standard Go Pro Nut (For Go Pro Mount)  

If you decide to print this, I would love to see the results as I don't have a printer yet and would love to see my designs become reality. Thanks!

As always, Good Luck, High Fives all around, and Happy Printing!

Jonathan

Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheArm.stl

#3DPNSpeakerCover

The Arm is a combination system for mounting things with endless possibilities. You can mount this to your speakers as an additional way of having your camera or Go Pro for taking videos/pictures, or you can use the base as just a speaker cover. You can also use this as a base to mount the system to a desk or another place.  

The Arm's Base is not only a general speaker cover, but a base for a ball style mounting system, giving the user another way of printing and mounting their Go Pro or Camera, while only needing a few pieces of hardware to complete the set. 

There are 11 printable pieces for the current selection of parts  for the mounting system.

Needed parts include:
1 ) - 2.75" Long 1/4" diameter bolt
1 ) - 2" Long 1/4" diameter bolt 
2 ) - 1/4" Nuts (Ideally Wingnut)
1 ) - Camera mounting bolt (For Camera Mount)
1 ) - Standard Go Pro Screw (For Go Pro Mount)
1 ) - Standard Go Pro Nut (For Go Pro Mount)  

If you decide to print this, I would love to see the results as I don't have a printer yet and would love to see my designs become reality. Thanks!

As always, Good Luck, High Fives all around, and Happy Printing!

Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

Why? Cause add Molle to everything! 

The Molle speaker cover is designed for any molle webbing attachment, so have fun with it!

As always, good luck, high fives all around, and happy printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597  
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Molle.stl

#3DPNSpeakerCover

Why? Cause add Molle to everything! 

The Molle speaker cover is designed for any molle webbing attachment, so have fun with it!

As always, good luck, high fives all around, and happy printing!

Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Hoop speaker cover is designed so you can always have a mounted hoop to throw your crumpled failed designs through while sitting at your desk.

There are 4 parts that should be relatively easy to print flat on the bed. The backboard would be best to lay the front on the bed. All parts shouldn't need support, and there is no cushion for the mounting pegs of the hoop for a snug fit.

Feedback is welcomed!

As always, good luck, high five's all around, and happy printing!  

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335  
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheHoop.stl

#3DPNSpeakerCover

The Hoop speaker cover is designed so you can always have a mounted hoop to throw your crumpled failed designs through while sitting at your desk.

There are 4 parts that should be relatively easy to print flat on the bed. The backboard would be best to lay the front on the bed. All parts shouldn't need support, and there is no cushion for the mounting pegs of the hoop for a snug fit.

Feedback is welcomed!

As always, good luck, high five's all around, and happy printing!  

Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

This speaker cover is for all the fans of the State of Decay game series. Even though its quite simple, I hand sketched it from the logo  to be extruded, so it was a bit time consuming to say the least. I hope whoever might try this print gets great success and enjoyment from it as much as the games themselves.

As always, Good Luck, High Fives all around, and Happy Printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333  
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Decay.stl

#3DPNSpeakerCover

This speaker cover is for all the fans of the State of Decay game series. Even though its quite simple, I hand sketched it from the logo  to be extruded, so it was a bit time consuming to say the least. I hope whoever might try this print gets great success and enjoyment from it as much as the games themselves.

As always, Good Luck, High Fives all around, and Happy Printing!

Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The "Maximum Extermination!" speaker cover is the ultimate version of the Doctor Who inspired Dalek's Gunstick and Eyestalk. The Gunstick and Eyestalk both can be moved in different directions to give the ideal positioning for your speakers. Make your speakers the ultimate sound annihilators!

There are 4 challenging parts to print including;  The Gunstick, Eyestalk, right framework, and left framework, as well as plugs for each screw hole.
 
Feedback is appreciated!

As always, Good Luck, High Five, and Happy Printing!

Jonathan

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328  
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-MaximumExtermination!.stl

#3DPNSpeakerCover

The "Maximum Extermination!" speaker cover is the ultimate version of the Doctor Who inspired Dalek's Gunstick and Eyestalk. The Gunstick and Eyestalk both can be moved in different directions to give the ideal positioning for your speakers. Make your speakers the ultimate sound annihilators!

There are 4 challenging parts to print including;  The Gunstick, Eyestalk, right framework, and left framework, as well as plugs for each screw hole.
 
Feedback is appreciated!

As always, Good Luck, High Five, and Happy Printing!

Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The "Exterminate!" V2 speaker cover is inspired by Doctor Who and the Dalek's Gunstick. The Gunstick itself can be spun. There is another version of it were the gunstick can be aimed in different directions as well. Feedback is welcomed. 

There are 3 parts, plus plugs, and supports are suggested.

Good luck, high five, and happy printing!

-Jonathan  

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Exterminate! V2.stl

#3DPNSpeakerCover

The "Exterminate!" V2 speaker cover is inspired by Doctor Who and the Dalek's Gunstick. The Gunstick itself can be spun. There is another version of it were the gunstick can be aimed in different directions as well. Feedback is welcomed. 

There are 3 parts, plus plugs, and supports are suggested.

Good luck, high five, and happy printing!

-Jonathan  

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The "Exterminate!" speaker cover is inspired by Doctor Who and the Dalek's Gunstick. The Gunstick itself can be spun so it aims in different directions. There is another version of it were the gunstick is straight as well. Feedback is welcomed. 

There are 3 parts, plus plugs, and supports are suggested.

Good luck, high five, and happy printing!

-Jonathan  

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Exterminate!.stl

#3DPNSpeakerCover

The "Exterminate!" speaker cover is inspired by Doctor Who and the Dalek's Gunstick. The Gunstick itself can be spun so it aims in different directions. There is another version of it were the gunstick is straight as well. Feedback is welcomed. 

There are 3 parts, plus plugs, and supports are suggested.

Good luck, high five, and happy printing!

-Jonathan  

#3DPNSpeakerCover-Exterminate!1.stl

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Gyro aka "Gyroscope", is a fully movable speaker cover. There are 3 sections included. Each ring can spin on their axis creating a large gyroscopic globe once each ring is twisted. The large main piece should be able to print flat on the bed as a print in place, while the "legs" should be able to print along side it. Thanks for any feedback! 

As always good luck, high fives all around, and happy printing!

Jonathan
   

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheGyro.stl

#3DPNSpeakerCover

The Gyro aka "Gyroscope", is a fully movable speaker cover. There are 3 sections included. The large main piece's rings can spin on there axis creating a large gyroscopic globe once each part is spun. The large main piece should be able to print flat on the bed as one piece, while the "legs" should be able to print along side the large part. thanks for any feedback! Good luck, high five, and happy printing!

Jonathan
   

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

Cap's Shield V2 - Skeletonized



The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Cap'sShieldV2.stl

#3DPNSpeakerCover

Cap's Shield V2 - Skeletonized

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

Cap's Shield with base.

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Cap'sShieldV1.stl

#3DPNSpeakerCover

Cap's Shield with base.

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The Sonic Boom

-Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-SonicBoom.stl

#3DPNSpeakerCover

The Sonic Boom

-Jonathan

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

This version of the Crown speaker cover is built upon version 1 increasing complexity and overall protection of the speaker. Though this may be a challenging model to print, I believe it would add a nice flare to any speaker, making them the king of all speakers and sound. Good luck, High Five, and Happy Printing!  

Any feedback is welcomed! Thanks.
-Jonathan  


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheCrownV2.stl

#3DPNSpeakerCover

This version of the Crown speaker cover is built upon version 1 increasing complexity and overall protection of the speaker. Any feedback is welcomed! Thanks.
-Jonathan  

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

This first version of the Crown speaker cover is a minimalistic design opening up opportunities for a more complex design to come in version 2. 

Any feedback is welcomed! Thanks.

-Jonathan  

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheCrownV1.stl

#3DPNSpeakerCover

This first version of the Crown speaker cover is a minimalistic design opening up opportunities for a more complex design to come in version 2. Any feedback is welcomed! Thanks.
-Jonathan  

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

This speaker cover is my very first design using Fusion 360, so there is definitely some room for growth, as slightly indicated by my "The Burner" model. In future iterations, I would like to enhance the spinning capabilities of this model and play around with the idea a bit more. Thanks for any input!

The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-Spinnerv1.stl

#3DPNSpeakerCover

This speaker cover is my very first design using Fusion 360, so there is definitely some room for growth, as slightly indicated by my "The Burner" model. In future iterations, I would like to enhance the spinning capabilities of this model and play around with the idea a bit more. Thanks for any input!

#3DPNSpeakerCover-Spinnerv3.stl

#3DPNSpeakerCover

(If you choose to print this, I would love to see the results as I don't have a printer to test my designs yet. Thanks!)

The "Burner" AKA "This Speaker is Lit" is a concept I came up with for the #3DPNSpeakerCover contest. It has the ability to have the flames section of the speaker cover spin in any direction desired for placement. It comes in 3 parts or 2 depending on if you're brave enough to print it in place or not. 

My inspiration for this cover is a play on the saying, "This song is lit" and the general kitchen gas stove top. In future iterations I would like to build a much more robust design allowing the free spinning element to spin like a fidget spinner, though as I have no 3D printer yet, I have no way of testing my designs. Any feedback is appreciated. Thanks and good luck to all the contestants!

Jonathan


The Arm - https://thangs.com/JonathanM/3DPNSpeakerCoverTheArmstl-14597 
Molle - https://thangs.com/JonathanM/3DPNSpeakerCoverMollestl-14335 
The Hoop - https://thangs.com/JonathanM/3DPNSpeakerCoverTheHoopstl-14333 
Decay - https://thangs.com/JonathanM/3DPNSpeakerCoverDecaystl-14328 
Maximum Extermination!-https://thangs.com/JonathanM/3DPNSpeakerCoverMaximumExterminationstl-14298 
Exterminate! V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminate-V2stl-14246 
Exterminate! - https://thangs.com/JonathanM/3DPNSpeakerCoverExterminatestl-14244 
The Gyro - https://thangs.com/JonathanM/3DPNSpeakerCoverTheGyrostl-14216 
Caps Shield V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV2stl-14108 
Caps Shield V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverCapsShieldV1stl-14106 
Sonic Boom - https://thangs.com/JonathanM/3DPNSpeakerCoverSonicBoomstl-14091 
The Crown V2 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV2stl-13892 
The Crown V1 - https://thangs.com/JonathanM/3DPNSpeakerCoverTheCrownV1stl-13890 
The Burner - https://thangs.com/JonathanM/3DPNSpeakerCoverTheBurnerstl-13782 


#3DPNSpeakerCover-TheBurner.stl

#3DPNSpeakerCover

The "Burner" AKA "This Speaker is Lit" is a concept I came up with for the #3DPNSpeakerCover contest. It has the ability to have the flames section of the speaker cover spin in any direction desired for placement. It comes in 3 parts or 2 depending on if you're brave enough to print it in place or not. 

My inspiration for this cover is a play on the saying, "This song is lit" and the general kitchen gas stove top. In future iterations I would like to build a much more robust design allowing the free spinning element to spin like a fidget spinner, though as I have no 3D printer yet, I have no way of testing my designs. Any feedback is appreciated. Thanks and good luck to all the contestants!

Jonathan

#3DPNSpeakerCover-TheBurnerv2.stl

An Alaskan just starting in the 3D Printing world. I am enthusiastic to design & bring things to life, even though I don't have a 3D printer yet. I have an education in early years of AutoCAD, & a lot of experience in Metallurgy, Leatherworks, Sewing, Mechanics, Millworks, Carpentry, & more.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

JonathanM

Achievements

Seedling

Explorer