All Kekreations designs are under Copyright and you may NOT sell any digital files or prints of my designs. 

If you are interested in obtaining the rights to sell commercially, you can join the Thangs Membership!

Check out my socials to keep up with other designs in the works!
[Instagram](https://www.instagram.com/kekreationsart/)
[Tiktok](https://www.tiktok.com/@kekreationsart)
[Facebook](https://www.facebook.com/kekreationsart)
[Youtube](https://www.youtube.com/channel/UCz5aaSy-DlRZ7P6W_7WUVxg)

Feel free to tag me or DM me on any socials if you post photos, I would love to see them! <3


dragon paper towel holder

dragon paper towel holder.stl

Embrace the magic of reading with the Book Wyrm Page Holder, a 3D model designed to keep your book open and your page secure. This charming, support-free dragon is engaged in its own miniature book, with wings that gently hold the spot of your book when you're not reading. Perfect for avid readers and fantasy enthusiasts alike, the Book Wyrm can be printed at full size to fit most standard books or scaled down for smaller volumes.

Updated 11/2- Hello all! Some people have reported the wings have printed poorly with obvious line streaks. I have thickened the wings and it prints better now. I also recommend 3 walls, rather than 2 walls. I'm so sorry if you printed it and it wasn't perfect!

**Filament Usage:** Approximately 285 grams (at full size) with 2 walls and 15% lightning infill

**Setting: **
2 walls
15% lightning infill
However, I now recommend 3 walls 5% infill for a cleaner, stronger print
Support-Free

Book Wyrm Page Holder

Book Wyrm Page Holder.stl

**The Reading Dragon Book Nook** is a model featuring a dragon peacefully reading a book. Designed for book lovers and fantasy fans, it adds a unique touch to any shelf. The dragon and box can print together on a standard 250mm by 250mm build plate, or separately if desired. Minimal supports are needed for a small section at the bottom where the dragon will sit on the box. The .3mf file is include with print settings that are optimized for strength and efficiency while keeping details crisp. With a compact and functional design, this book nook brings a bit of mythical charm to any reading space.  

**Print Settings & Filament Usage:**

- Filament Usage: 423g (Box + Dragon)

- Layer Height: 0.20mm

- Walls: 3

- Infill: 5% gyroid

- Supports: Small area need on dragon. I used tree supports (build plate only, critical regions only, remove small overhangs)

As always, tag me in your post so I can share it with the community! 
Happy printing, 
Christian, @CraftyKid3D

The Reading Dragon Book Nook

DRAGON- The Reading Dragon Book Nook.stl

You asked longingly about this design. I was written to several times on Tiktok and Facebook and there were also a few comments on various channels.

Now the wait is finally over. We designed this design with Amazon Dot 5th generation. I was told that the older versions have the same dimension. So it shouldn't be a problem

THAT'S ALL I CAN SAY. LET THE DRAGON FREE :D

For the sellers among you

Please make sure you know how to sell this design without getting into legal trouble. According to our lawyer, it's not a problem if you don't mention Amazon or Dot directly, i.e. names like. Amazon's Dragon Dot .. are not permitted. According to our lawyer, it's okay if you write compatible for.... But every country is different. Please inquire here if you are unsure. Unfortunately, we cannot make any legal statements here

--------------------------------------------

DISCORD
We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

-------------------------------------------------

EASY PAINTING SYSTEM - suitable for multicolor printing
By simply clicking on the colors, the predefined areas are automatically marked. If you have any problems or questions regarding this, write to us in the comments.

Lying baby dragon - compatible with Amazon Dot

Lying baby dragon STL.stl

Upper body part.stl

lower body part.stl

Show off your favorite reads or devices in style with the Book Wyrm Display! This 3D-printed model features a whimsical dragon lost in its own book, while its wings hold your favorite book, Kindle, or tablet for display. This support-free model is both functional and captivating, making it the ideal showcase for your cherished stories or devices.

**Three Versions Included**
Large Book Version: Designed to display hardcover and larger books.
Kindle/Tablet Version: Sized to hold most e-readers and tablets securely.
Bonus Wings Model: A standalone high-detail version of the dragon’s wings for creative use or decoration.

**Print Settings**

Infill: 5% gyroid
Walls: 3
Supports: None
Layer Height: 0.16 mm

**Filament Usage**

Large Book Version: 212g
Kindle/Tablet Version: 125g
Bonus Wings Model: 121g

Turn your bookshelf or desk into a magical display with the Book Wyrm Display, where your favorite stories and devices take center stage!

Book Wyrm Display (Book & Tablet Version + Bonus Model)

Book Wyrm Display (Books).stl

Book Wyrm Display (Kindle, Tablet).stl

Book Wyrm Display LARGE Books .stl

**HELLO**
I present to you the dragon egg with scales ideal for decoration
This design has its parts separated in case you want to increase the scale and a complete STL to print the two parts in a single print.

**Advantages**
• This dragon egg design is scaled and adjusted to print on most printers on the market.
• Ideal for those new to 3D printing.
• This design does not require supports

**Remember that to sell physical 3D printing it is necessary to obtain a commercial license, more information in the membership button**

**COPYRIGHT**
All TORUA3D designs are protected by copyright.
The purchase of this 3D model and its physical print is for personal use only.

TORUA3D designs and files may not be used for any commercial use; it is for personal use only. The 3D model or any part of the model in digital or physical format may not be shared, transmitted, redistributed, remixed, modified, duplicated or sold.
**(Do not commercialize)**

Dragon egg 017 - Print in place - No supports - STL

01. EGG 017 - COMPLETE.stl

Easy to Print

220mm x 220mm, 2mm thick.

For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are normally the top colour layer)

White Dragon wall art

Dragon Light_1.stl

This is my dragon, I hope you like it. You can print it without support.
Filling: 15%
Extent: 2

This creatively designed and poseable "dragon" model is finished with intricate details. Its flexibility makes it an incredibly realistic dragon. Have fun playing with this dragon. Whether you prefer to pose it or fidget with it.

If you want to support me, join my Patreon.
https://www.patreon.com/c/Flexi__Maker

Do not publish, distribute, sell, or trade the files or physical models of this object.

Articulated dragon

Dragon.stl

A set of dragon bookends. Prints with support. Bambu studio .3mf file.

DragonBookends.3mf

This is a movable crystal kite that is printed on the spot. You need good bed adhesion.
In addition, the dragon has a kick system on the wings to extend its lifespan.

It has also been tested with edge and comes off beautifully.

Happy printing!

I used Eryone Filament Colorful.

3D Printing Settings Edge: No Support: No Perimeter: 2 Filling: 5% Material: PLA
If you want to support me, join my Patreon.
https://www.patreon.com/Flexi__Maker?utm_campaign=creatorshare_creator



Baby Crystal Wing Dragon

Drache  mit mehr kristallen (7).stl

dragons

I run 2 FB pages. Waddle Works and Planetary Crystals. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Jennifer Waddle

Achievements

Voyager

Novice Maker

Seedling