note :

All parts are designed to be printed without supports
Make it as long as you like

Articulated Human Centipede - No support

3 torso.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5840206.

Note: 

• originally designed for resin printers but you could try FDM (ender etc)
• hand peg are a bit too large for the hole , you can sand it down if using resin printer
•assembly video : 
https://www.youtube.com/shorts/1e30Xp8T8Fg
.
.
.
happy printing guys

The mask 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5613582.

 Notes

•all joints are movable. 
•NO SUPPORTS NEEDED elsewhere 
.
.
.
.
happy printing 
jayjay(hong kong sculptor)

Bear Brick

9_pegs_.stl

8_legs.STL

7_right_hand.STL

6_right_arm.STL

5_left_hand.STL

4_left_arm.STL

3_hip.stl

2_body.STL

1_head.STL

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4941948.

for print video go to www.instagram.com/jayjay.travel/

two versions of print model are provided:
(1) dissembled version - printable without any supports, also suitable for people with smaller printers who wanted to create a larger print, 
(2) assembled version - print with supports (everywhere), 
(3) dissembled version (separate stl files) 

note : red bull did not sponsors this. 

Red bull sculpture 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4943387.

note :
1. Print using translucent PLA, 
2. cable hole in the back of the bear,
3. use colorful led light inside for nice moody light effect,  
4. no supports needed ;D

go to my ig @ www.instagram.com/jayjay.sculpt/ 
for video preview of the printed model

enjoy ~

Sitting Bear lamp shade 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5606288.

❓ TO THE BATMAN ❓

care for a riddle ? answer is at the bottom, appears only when lid . 



Riddler lamp 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5943801.

only support needed is at the chin ~

one without keychain extention is also attached if you want to use it as desk decoration. 

excellent on your boss desk. 

happy pooping ~

POOP Key Chain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5900034.

originally designed for resin printers
print easily on fdm printers also 

version 1 : with hat 
version 2 : without hat 

happy printing guys. 

original 2d art is from somewhere i will update when i found it again. 

skate board kid 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5404422.

doom lamp part 1,2,3  supports needed? ❌no

doom lamp part 4        supports needed? ✔️yes

3d print shown on video was done on ender 5 plus

video : https://youtu.be/_XvLR46I4co

drop me a line for any query, 

doom theme lamp 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4851667.

first print : head : vertical support from base only 
second print : head : tree support for everywhere (not just base)
raft : yes
nozzle diameter 0.2 mm (default)
scale down may destroy details 

Scale 1:3 Resident Evil's Ada wong 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5524776.

Support : 
part 1, part 3, part 4  : no support needed
part 2a , part 2b : support at base plate only 
 
Adhesion : i use brim for poor adhesion

What to print : 
part 2a has no phone stand slot , part 2b has phone stand slot . They can be printed together and swap when desired. depend on what you want the figure to be (a phone stand or just a figure) 

Additional advice: 
perhaps try printing part 4 (the face) vertically so to minimizes the layer line on the face.


Artist ig : 
www.instagram.com/jayjay.sculpt

Disclaimer : it may looks like from one of the paid model from other sites but i simply done it from scratch with one of the free T-pose model (which is also free). 


Fall Guy phone stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5986045.

In Dedication to my late cat  "handsome" . 

2010 - 2022.4.23 

"This lamp is dedicated to all the cats who have touched our hearts and left pawprints on our souls, May it light up your space with warmth and comfort "

by jayjaysculpt

3d printing guide : 
- no support needed
- 3 versions for the bottom component ,1. original, 2. with ash urn holder , 3. with light outlet , 
- for the ash urn version , please increase the infill for the bottom component to ensure the tray is supported by infill for proper printing ( for ash tray version )

Cat shaped lamp 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5421775.

FEATURE : 

minimal bending while feeding / printing 
ideal for brittle / old PLA

Support needed ? 
spool frame (no need)⛔ 
spool pin (yes)✔️

video: 
https://www.youtube.com/watch?v=PBXphl4Tv_U


Spool holder with minimal filament bending while feeding

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4885490.

Deer sculpture designed by me 
feel free to design your own antler as i have left a slot on deer head ,
or wait for my update as i will add a variety of antler in a weeks time. 

Deer sculpture

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Jayjaysculpt

Achievements

Seedling

Up and Coming