Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5548980.

Lidl Glider Pusher Power Pod

Designed for 12 x 12 mm M2 hole mount. I used a Racerstar Racing Edition 1806 motor with a 4" prop.

Designed to be printed with no supports. To make it stronger, print at a higher temperature. V2 is for motors shaft that stick out past the motor base.

For the 12 x 16 mm mount https://www.thingiverse.com/thing:5585789

For the 16 x 19 mm mount https://www.thingiverse.com/thing:5624386

My set-up 3S 1000mah lipo 3 x 5 gram servos 3 bladed 4 inch prop Racerstar Racing Edition 1806 75 watts at full power 25a ESC All up, weight 320g

Flight video https://youtu.be/dKA-KWGKGeA