John B

Jack Skellington

by
Jack_Geno_John
Follow
Follow
Remix Model
Jack_Geno_John
Jack_Geno_John
|
Image 1 of 4
Jack Skellington 3d model
Jack_Geno_John
Jack_Geno_John
|
Image 1 of 4
Jack Skellington 3d model
2D
3D
Makes
Jack Skellington 3d model
Jack Skellington 3d model
Jack Skellington 3d model
Jack Skellington 3d model
This model is restricted by licensing terms. 

You can never go wrong with more Jack!

Photo was produced using Night Cafe

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions: Start with Charcoal At layer #20 (1mm) swap to Dark Brown At layer #29 (1.36mm) swap to Gray At layer #46 (2.04mm) swap to Ivory White for the rest.


7 Likes8 DownloadsJanuary 25, 2024


7 Likes8 DownloadsJanuary 25, 2024
This model is restricted by licensing terms.