**Design in progress

Still work in progress though it should all work as designed

will be updating it as pieces are made and if any issues are seen during the print process

TPU pads for the bottom to help prevent it from sliding around

Sanding and a mild amount of polishing may be required on the slider section depending on how smooth your printer and produce. I tested it with Monotopic Top/Bottom from Cura and seemed to provide adequate sliding ability.

If there is anything else you'd like to see designed please let me know and I'll look into it

Print Settings
Rafts:
No

Supports:
Yes

Resolution:
200

Infill:
20

slider back.stl

spacer.stl

pad holder.stl

tpu pad.stl

Halot-Sky Slider full view.stl

slider front.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4978677.

Designed to help test LED light sources through materials to see how the light penetrates prior to printing!

Light Box Calibration

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5029678.

Holiday Xmas Sign

requires a 300x300 bed at a 45 angle to print

Designed with Multi Level color in mind!

**Updated the Xmas Letters when i extruded forgot to hit up the inside R's

Merry Christmas - LED Lights

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5008454.

THESE ARE DISIGNED TO FILL AN AREA OF 220mm x 220mm x 50mm

I RUN THESE PRINTS PRETTY FAST 80mm/s ON AVERAGE WITH MINIMAL ISSUES

LEDS CAN BE INSTALLED ON THE BOTTOM HALF AND HELP IN PLACE WITH HOT GLUE AND PLUGS ARE INCLUDED FOR YOUR CABLE ROUTING

CUSTOM NAMES ARE AVAILIBLE WITH DONATIONS I CAN ADD THEM AND SEND YOU A SPECIALIZED STL FILE!

THESE ARE PRINTED ON A 0.6mm NOZZLE BUT I TRIED TO KEEP THE DIMENSIONS ASA CROSS COMPATIBLE WITH 0.4mm AS WELL

LED LETTERS

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

JTcreationsCA