Recently, two Barbary doves have come to live in our garden - I looked for a birdhouse that would be suitable for them but couldn't find one, so I made my own!

This model is a bird house - it is designed to be as large as possible for a Bambu Lab printer, however it can be scaled to any size. There are holes in the back to allow it to be screwed in place - there are two different sized holes to allow for 50% scaling.

I printed this full size at 7% infill, two shell layers and wall loops. You can scale the model to any size needed.

No supports required

Birdhouse for larger birds - JCreateNZ

Birdhouse JCreateNZ.stl

This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Star Tsurikawa Strap Lock

Star Strap Lock Top.stl

This is a rectangle tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Rectangle Tsurikawa Strap Lock

Rectangle Strap Lock Top.stl

This model is an oval tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Oval Tsurikawa Strap Lock

Oval Strap Lock Top.stl

This is an octagon tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Octogon Tsurikawa Strap Lock

Octagon Strap Lock Top.stl

This model is a tool for accurately punching the holes in a tsurikawa strap - for use with my tsurikawa strap locks (see my other designs for the free files). You can make a tsurikawa strap without this tool, however this makes it quick to make tsurikawa straps in bulk.

We suggest a strap length of 35cm - this model is NOT the suggested length of the strap.

Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10 screws and nuts, and a 3D printed strap lock (the models for the strap locks are available free - check out my other designs!)

To use the template cut a 35cm section of strap and line the pointed end of the template up with the edge of the strap. Punch the first four holes using a handheld punch (and the fifth hole if attaching a snap button). Cut the end of the strap to a point matching the template tool.

Tsurikawa Strap Hole Template Tool

Hole Template.stl

This is a heart tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Heart Tsurikawa Strap Lock

Heart Strap Lock Top.stl

This model is a standard tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts).

See the images of the assembled tsurikawa for an example of how the strap is assembled (with a snap button).

The strap, screws and nuts are available very cheap online - we suggest cutting the strap to a length of 35cm. A snap button can also be added to the tsurikawa strap (we suggest a 15mm snap button).

Standard Tsurikawa Strap Lock

Standard Strap Lock Top.stl

Instant Access to all models and a commercial license to sell physical prints!

 Any design can be also used privately (not for commercial sale)!

You are not permitted to sell or distribute the digital files. Your commercial license automatically ends when you are no longer an active member.

I ask that you please credit JCreateNZ for the design when listing items for sale.

Commercial License + All Models!

Car Accessories - Tsurikawa - Charms - Keychains

Become a member to receive access to all models and a commercial license to sell prints!

Only actively subscribed members have a commercial license - an individual purchase does not give you a commercial license.

Please check out my socials!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow