Introducing **Slidfinity**!!! Slidfinity is a gridfinity compatible drawer system. I specifically designed the Slidfinity drawers to work with [Grid Control](https://thangs.com/model/698708) hooks. This allows the angled bins to slide in neatly but any gridfinity object should slide in!

**Frames**
There are 24 different frame sizes available in TWO different styles at the moment. The original uses less filament and provides more strength than the passthrough model. The passthrough is just barely large enough to sneak an American extension cord through if you want to charge something above your layer of drawers.

 I recommend only placing magnets in the last row of the frame. This allows for the drawers to slide easily but lock into place. 

**Bins**
Over Time I will be adding in more bins as I begin to fill out my wall of slidfinity (echoes). As of right now, the available bin types are:

1. The basic bin - It's a bin with a slot to 3D-print a label (glued on) and a nice little slot to pull it out.
2. Divider bin - It's the basic bin, with a cupholder for tiny cups.
3. Container Bin - A bin with smaller bins that pull out vertically

Slidfinity - Gridfinity Compatible Drawers

slidfinity_frame_1x1.3mf

slidfinity_frame_1x2.3mf

slidfinity_frame_1x3.3mf

slidfinity_frame_1x4.3mf

slidfinity_frame_2x1.3mf

slidfinity_frame_2x2.3mf

slidfinity_frame_2x3.3mf

slidfinity_frame_2x4.3mf

slidfinity_frame_3x1.3mf

slidfinity_frame_3x2.3mf

slidfinity_frame_3x3.3mf

slidfinity_frame_3x4.3mf

slidfinity_frame_4x1.3mf

slidfinity_frame_4x2.3mf

slidfinity_frame_4x3.3mf

slidfinity_frame_4x4.3mf

slidfinity_frame_5x1.3mf

slidfinity_frame_5x2.3mf

slidfinity_frame_5x3.3mf

slidfinity_frame_5x4.3mf

slidfinity_frame_6x1.3mf

slidfinity_frame_6x2.3mf

slidfinity_frame_6x3.3mf

slidfinity_frame_6x4.3mf

slidfinity_handle_box_1x3.3mf

slidfinity_handle_box_2x3.3mf

slidfinity_handle_box_3x3.3mf

slidfinity_2_divider_box_1x3.3mf

slidfinity_2_divider_box_2x3.3mf

slidfinity_frame_passthrough_1x1.3mf

slidfinity_frame_passthrough_1x2.3mf

slidfinity_frame_passthrough_1x3.3mf

slidfinity_frame_passthrough_1x4.3mf

slidfinity_frame_passthrough_2x1.3mf

slidfinity_frame_passthrough_2x2.3mf

slidfinity_frame_passthrough_2x3.3mf

slidfinity_frame_passthrough_2x4.3mf

slidfinity_frame_passthrough_3x1.3mf

slidfinity_frame_passthrough_3x2.3mf

slidfinity_frame_passthrough_3x3.3mf

slidfinity_frame_passthrough_3x4.3mf

slidfinity_frame_passthrough_4x1.3mf

slidfinity_frame_passthrough_4x2.3mf

slidfinity_frame_passthrough_4x3.3mf

slidfinity_frame_passthrough_4x4.3mf

slidfinity_frame_passthrough_5x1.3mf

slidfinity_frame_passthrough_5x2.3mf

slidfinity_frame_passthrough_5x3.3mf

slidfinity_frame_passthrough_5x4.3mf

slidfinity_frame_passthrough_6x1.3mf

slidfinity_frame_passthrough_6x2.3mf

slidfinity_frame_passthrough_6x3.3mf

slidfinity_frame_passthrough_6x4.3mf

slidfinity_2_container_box_1x3.3mf

slidfinity_4_container_box_1x3.3mf

slidfinity_4_container_box_2x3.3mf

slidfinity_2_container_box_2x3.3mf

Introducing **Grid Control**!!! A new series of adapters to allow the mounting of Gridfinity frames on wall control panels. 

These hooks can accommodate any Gridfinity frame that includes 3mm holes through the underside below the magnets. For testing, I used the [Gridfinity Magnet Light Baseplate](https://www.printables.com/model/250550) by RIP_Plo-Koon over on printables.

At the moment, there are hooks to add between 1-4 grids deep. These are broken into 3 different, 3-wide sections of grids. This provides centering of the grids on the Wall Control panel. 

GridControl - Wall Control to Gridfinity Hooks

3_Deep_6_Wide_Hooks.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Imover.Engineering

Slidfinity - Gridfinity Compatible Drawers

GridControl - Wall Control to Gridfinity Hooks