https://youtu.be/niRxJR1zGrg

List of parts- 

2x - Servo MG90D - s.click.aliexpress.com/e/_9Aj5xd
1x - Servo MG996R - s.click.aliexpress.com/e/_9xSPmB
6x - Linkage Stoppers M2 x 1.8 mm - s.click.aliexpress.com/e/_Ae2TFZ
4x - ball joint M2 x 1.8mm - s.click.aliexpress.com/e/_A9oAZd
1x - cardan joint 4x4mm - s.click.aliexpress.com/e/_ABubPD
1x - linear bearing LM8UU - s.click.aliexpress.com/e/_A4AHEr
Metal rod 1.5mm (cut 5 pieces of 60mm)
Metal shaft 8mm (cut 1 piece of 85mm)
2x - Bolt M3x12mm
4x - Bolt 2.2x10mm
2x - Bolt M4x10mm
1x - Bolt M4 x 30mm with nut
4x - Bolt M2x10mm
4x - Bolt 2.8x10mm


3d Printer:
Ender 3 pro = s.click.aliexpress.com/e/_Agmu2k


For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

51mm 3D printed animatronic eye mechanism

Base.STL

DIY - Animatronic 51mm eye

https://youtu.be/Lwg8IWPoNwM

if you like it, please consider to subscribe my youtube channel

List of materials =

Servo tester - https://s.click.aliexpress.com/e/_dWuGL7T
Glass dome eye - https://s.click.aliexpress.com/e/_dX82KA9
Servo SG90 - https://s.click.aliexpress.com/e/_dWaI6C1

Eyelids – 30% infill
Eyes – 50% infill
Eyesupport – 100% infill
Base – 30% infill

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Animatronic Eye

Eye51mm.STL

DIY - Optimized Face Shield

Less material, less printing time, more comfortable!

https://youtu.be/dBLmPwgSc1E

List of materials =

Acetate sheet = https://amzn.to/2Tc0CFk

4 holes puncher = https://amzn.to/3byywu7

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Face Shield

FaceShield.STL

DIY – Pass the Butter Robot

This 3D printed robot is remoted controlled by an android app using bluetooth

https://youtu.be/-GgxntIj2UA

https://youtu.be/mwk3rZHXSPk

if you like it, please consider to subscribe my youtube channel

Based on the Rick and Morty cartoon by Adult Swim - S1E9

List of parts:

Servo SG-90 - https://s.click.aliexpress.com/e/_dWaI6C1
Servo SR-402P - https://pt.aliexpress.com/i/1620933545.html
L298 mini Driver - http://s.click.aliexpress.com/e/_dUH6YTj
Speaker 8R 2W 20x4.5mm - http://s.click.aliexpress.com/e/_dWagJVz
Arduino Nano - http://s.click.aliexpress.com/e/_d7EFcFd
MP3 module - http://s.click.aliexpress.com/e/_d6SdmgB
Bluetooth module - http://s.click.aliexpress.com/e/_BfgAuNCp
Battery – Rhino 610 3S
Wheels – Pololu item #642
Dc Dc Module - http://s.click.aliexpress.com/e/_dTsJeCr
Motor – 100 RPM @ 6 Volts - http://s.click.aliexpress.com/e/_dVS6Jil
Servo Tester - https://s.click.aliexpress.com/e/_dWuGL7T

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Pass the Butter Robot

Head.STL

DIY – Obstacle Avoiding Robot

This 3D printed robot is controlled by an arduino, programmed to avoid obstacle using an ultrasonic sensor

https://youtu.be/eR283xyLk98

List of parts:

Servo MG90S - http://s.click.aliexpress.com/e/_dSTUmGQ
L298 mini Driver - http://s.click.aliexpress.com/e/_dUH6YTj
Arduino Nano - http://s.click.aliexpress.com/e/_d7EFcFd
Ultrasonic sensor - http://s.click.aliexpress.com/e/_dYUXR5d
Battery – NiCd 4.8V
Wheels – http://s.click.aliexpress.com/e/_dVuzQCn
Motor – 100 RPM @ 6 Volts - http://s.click.aliexpress.com/e/_dVS6Jil
You can try different bolt sizes

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Obstacle Avoiding Robot!

The challenge was to transform a game character into a real animatronic.
My daughter choose Carl the cupcake from FNAF and here is the result!

https://youtu.be/mfhrf4_7yIM

if you like it, please consider to subscribe my youtube channel

Parts description:

3D printed parts
2X Red LED 3mm
1X White LED 5mm
3X Resistor to connect your LEDs (value depends on the voltage you are using)
2X Eyes 26 mm
2X Servos SG90
1mm metal rod - 3 pieces of 60mm should be enought
1X bolt 3mm x 45mm
2X bolt 2mm x 5mm
2X bolt 2.8 x 12 mm
6X bolt 2.2 x 10 mm
4X bolt 2 x 8 mm

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

FNAF Cupcake

HeadUpper.STL

RC Drift car

This 3D printed drift car is a lot of fun!

https://youtu.be/-B3mI3eYeAA

if you like it, please consider to subscribe my youtube channel


List of parts:
3D printed parts
Drill motor
ESC 30Amp
Servo MG995 Tower Pro
Battery 3S
Remote Control and receiver
OnOff switch
Zip Ties
XL Pulley
XL Belt 110XL 037 - 279.4mm
8mm x 194 mm shaft
2X bearing 8 x 16 mm

Bolts:
2X 4mm x 40mm with nuts
2X 6mm x 45mm with nuts and washers
12X 4mm x 10mm with nuts
10X 4mm x 15mm with nuts
1X 3mm x 15mm with nut
4X 3mm x 12mm with nuts
2X 8mm x 55mm


For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Simple RC Drift car

ChassisFront.STL

Tutorial: Assembling the 26mm animatronic eye mechanism - Version2

https://youtu.be/W9a8fvBpOwc

if you like it, please consider to subscribe my youtube channel

List of material:

3D printed parts
1X M2 x 12mm
13X M2 x 8mm
1X M2 Nut
4X micro servos (SG90 or MG90D or MG90S)
Plastic Eye 26mm
1 ~ 1.5mm metal rod - I recommend 1.2mm
4X Plastic M2 ball joint
4X Metal Linkage D4mm x Φ1.2mm

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Animatronic Eye 26mm

Base26mmSquare.STL

Tutorial explaining eye assembly for dolls, puppets, robots and animatronics

https://youtu.be/S1RYJszkoVM

if you like it, please consider to subscribe my youtube channel

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Making Eyes for puppets and animatronics

Eye51mmCut.STL

DIY – Neck mechanism for animatronics

This 3D printed neck mechanism can be controlled by an arduino or RC,

https://youtu.be/1NAlPKeRZTM

if you like it, please consider to subscribe my youtube channel

List of parts:
3X servo MG995 or similar
4X ball joint 3mm x 3mm (both sides of the brass ball is convex)
1X Cardan Joint 6mm x 5mm
1X bolt 5mm x 20mm
4X bolts 5mm x 25mm with nuts
12X bolts 3mm x 10mm with nuts
2X bolts 3mm x 12mm with nuts
4X bolts 5mm x 15mm with nuts
3X 6mm nuts
2X 3mm nuts with washers
6X 3mm nuts
1X 6mm threaded rod
1X 3mm threaded rod

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Neck mechanism for animatronics and puppets

NeckBase.STL

Candy boxes based on the game Among Us - Crewmate and Impostor


https://youtu.be/A6hXXD8zLps

if you like it, please consider to subscribe my youtube channel

List of material -

3D printed files
8X M2 x 3mm bolts
1X M3 x 20mm bolt with nut
Plastic eye 26mm - https://s.click.aliexpress.com/e/_9JypaB

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Among Us Gift Box

AmongUsHeadCrew.STL

Organize your tools! 3D printed tool holders

https://youtu.be/jMu-OQGuo9U

if you like it, please consider to subscribe my youtube channel

Wall tool holders

PaperWallHolder.STL

My approach to printing custom 3D colored signs using Paint, Tinkercad and Cura

https://youtu.be/eq2ppWbePU0

if you like it, please consider to subscribe my youtube channel

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop

Thanks, Enjoy it!

Create your Signs

NoHumansAllowedHW.stl

https://youtu.be/rg2zX3knIps

if you like it, please consider to subscribe my youtube channel

Parts description:

3D printed parts
Camera
Servo tester - https://s.click.aliexpress.com/e/_dWu...
7-Bit WS2812 5050 RGB LED Ring - https://s.click.aliexpress.com/e/_AT1X3Z
Servo 20Kg 180 - https://s.click.aliexpress.com/e/_Ab96uP
Arduino nano shield - https://s.click.aliexpress.com/e/_9xEy9p
1/2” Aluminium tube
8X M3x10mm with nuts
4X M3x10mm
2X M3x6mm (cap head)
4X M3x6mm (flat head)
6X 1.8x6mm
20X M5x12mm with nuts

For Arduino codes, MP3 files and much more, please support me on Patreon: http://www.patreon.com/HendrikxWorkshop​
Thanks, Enjoy it!

Robot Head

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like