Balisong Pins for Kenny Trainer

I made this pins for the Balisong print here
https://www.printables.com/model/215729

I don't have a printables account. The original normally uses M3 screws or something but I didn't feel like going to the store to get some so I made pins. 

They are 2 different sizes since the Balisong handles have different size holes. They are mostly a friction fit, at least when I printed them but I left them a little long so you can heat up and smash down the ends to form a sort of rivet top.

I printed them at .1 layer height, 210C, bed 60, .4mm nozzle and I used my Kingroon PLA+ but only because I'm trying to get rid of it.
I recommend a brim unless you are confident.

Nozzle Stick.stl

This is just a very simple 2 layer rectangle. My Anycubic Kobra Neo sometimes dribbles filament before a print or has a little booger on the nozzle. I needed a stick to get that off as the nozzle hits temp. I print these in batches of 6, they are meant to be disposable. You could also use them for an adhesion test or a first layer test I suppose. Do what you want with it.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

GruesomeJeans

Achievements

Seedling

Explorer

Balisong Pins for Kenny Trainer

Nozzle Stick.stl