I've got a LOT of saved Truvia containers sitting in a drawer in my office. Over the years of caffeinating and avoiding sugar, I've essentially started a collection. This year, in an attempt to organize myself better, I put up an HSW at my desk and a Gridfinity in my drawers. Slowly but surely my desk became more organized.

Then it occurred to me. These Truvia containers would be much better suited sitting OFF my desk. Not to mention, they're about the same size as the wall bins I was about to print.

This design is set up to use the original lid, or no lid at all, and the base of Truvia sweetener containers and re-use them as HSW bins. 

Future plans are to use a few of these as vases as well for my extensive Office space garden.

These were printed at:
- 0.28mm layer height
- 15% gyroid infill
- no support
- mouse ear brim

Connectors re-modeled from: [KYZ's HSW Ez-H Series](https://www.printables.com/model/469220-hsw-ez-h-series-tool-holders-honeycomb-storage-wal/files)

HSW Ez-H Truvia Twist mount

HSW Ez-H Truvia mount Solo Lid.step

Ever thought about ditching the fixed wire on your wired device? Well now it's a lot easier to make a "wireless" appliance by slapping on a powercon socket. PowerCon are rated at 250V-20A so you can mod just about anything to use a socket instead. Quickly swap from tool to tool with one single cord. 

This is a simple fixture that will hold two m3 inserts and allow you to sandwich the powercon socket in the front of your appliance with this bracket in the back to provide a nice compressive mount on your device or panel.

Enjoy!

PowerCon socket rear support Bracket

Powercon_Rear_Support.step

I've gone through a lot of bottles of Truvia sweetener for my coffee over the years. While those little containers are great on their own, I have far too many of them to be used **_just_** as flip top containers.

So, I took some measurements and made a few test prints to make sure it fit properly and now I have a .step file I can add to any of my future designs to attach one of these containers.

This isn't a finished item, it's a tool. Have you got a gum ball machine that needs a container? Add this and instantly be able to attach a truvia container. 
Want to make a wall mounted plant holder? add a plate and some screw holes and BAM there you go.

I'll likely upload some Thangs that use this but I figure I'll add the most important part for people to do what they please with it. Enjoy and don't be afraid to show me what you've done with it.

TruviaTwist Plug-in threading

TruviaTwist.step

I love my mag mounts. I've purchased a couple Scosche Magic Mounts in my day but 30$ for some silicone and a couple magnets sucks. I picked up a couple of [belt mountable magnetic tool holders](https://www.amazon.ca/gp/product/B0B213JB67/) for 12$ a piece and it turns out they're mounted with an M5 compatible threading. 

**Printing instructions:**
Add a pause at the beginning of layer 41 and at the beginning of layer 75. On layer 41, drop an m5x8 Flat head machine screw in there, on layer 75 drop your 1/4"-20 nut into the slot and resume printing

I printed in ABS, I'm sure PETG would work as well. I avoid PLA for this as I use mine on a magic arm in my car and the heat/uv would quickly kill that.

My print settings for this were the VORON part standard. 
- layer height 0.2
- infill 40%
- top and bottom shell layers 5
- wall loops 4

I use gyroid infill pattern because I like it.

Magnetic tool holder to 1/4" tripod Adapter

magadapter.stl

This is a quick model to hold a feeler gauge on the [Honeycomb Storage Wall](https://www.printables.com/model/152592-honeycomb-storage-wall) system. It uses an M3 insert backer with a single M3x10 Flathead screw.

This was made to fit specifically [this Feeler gauge. ](https://www.amazon.ca/gp/product/B07B3TQQSV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

Honeycomb Storage Wall: Feeler Gauge Holder

Saw [this model](https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%201x1%20Thread%20Tap%20Holder-212893) and tried it myself. Wrong size for the set I got. I think it should work for the M3 set but it for sure doesn't work on the M5 set. Here's my take on it.


I got this set:
[Adjustable T Handle Ratchet Tap Wrench Kit M5-M12 ](https://www.amazon.ca/gp/product/B07JHP4LXZ?psc=1&linkCode=ll1&tag=genghisjohn-20&linkId=a38fc9a8b6af46cbe55df1b8120ee28d&language=en_CA&ref_=as_li_ss_tl)

Along with this [tap set](https://amzn.to/3XlWmC0)

Gridfinity Ratcheting tap set M5-M12

Saw [this model](https://thangs.com/designer/LengAwaits/3d-model/Gridfinity%201x1%20Thread%20Tap%20Holder-212893) and tried it myself. Wrong size for the set I got. I think it should work for the M3 set but it for sure doesn't work on the M5 set. Here's my take on it.


I got this set:
[Adjustable T Handle Ratchet Tap Wrench Kit M5-M12 ](https://www.amazon.ca/gp/product/B07JHP4LXZ?psc=1&linkCode=ll1&tag=genghisjohn-20&linkId=a38fc9a8b6af46cbe55df1b8120ee28d&language=en_CA&ref_=as_li_ss_tl)

I only put 9 holes on the thing, even though you get 10 blades. I assumed the one in the deburring tool was counted. This one is based off [the model here](https://thangs.com/designer/atucom/3d-model/Gridfinity%20Deburring%20Tool%20Holder-65537).

--I got the set [here](https://www.amazon.ca/dp/B08SLBT6SJ/ref=twister_B0BTZ6X2WX?_encoding=UTF8&th=1)--
The price went crazy for the AFA version...[this looks the same](https://www.amazon.ca/NORJIN-Deburring-High-Speed-Countersink-Aluminum/dp/B0B23WB5PN/ref=sr_1_12?crid=3VQDB0ORWS3XB&keywords=AFA+Tooling+Deburring+Tool&qid=1690196459&sprefix=afa+tooling+deburring+tool%2Caps%2C76&sr=8-12)

Gridfinity 3 Tool Debur holder

I only put 9 holes on the thing, even though you get 10 blades. I assumed the one in the deburring tool was counted. This one is based off the model here.

I got the set [here](https://www.amazon.ca/dp/B08SLBT6SJ?psc=1&linkCode=ll1&tag=genghisjohn-20&linkId=dbf8bd1cd29017b2ed9a4eba16ddad4c&language=en_CA&ref_=as_li_ss_tl)

GenghisJohn

Achievements

Seedling

Voyager

Debutant

Pinned models

Gridfinity 3 Tool Debur holder

Gridfinity Ratcheting tap set M5-M12

HSW Ez-H Truvia Twist mount

HSW Ez-H Truvia Twist mount

PowerCon socket rear support Bracket

TruviaTwist Plug-in threading

Magnetic tool holder to 1/4" tripod Adapter

Honeycomb Storage Wall: Feeler Gauge Holder

Gridfinity Ratcheting tap set M5-M12

Gridfinity 3 Tool Debur holder