Garza Design154 followers

Utility Knife GRZ

773 downloads · 1 year ago · This is my first **utility knife** design, intended to be assembled **without using screws**. Just p

Description

This is my first utility knife design, intended to be assembled without using screws. Just put the blade on and you're done! It is compact and ergonomic, which makes it practical and comfortable to carry and use.

It does NOT need supports.

Update: The height of the edge blocker has been raised to better hold the pieces

NOTE: The new file has been uploaded individually, it is not updated in the set of parts.

If some tolerances do not fit, try modifying -/+ the horizontal expansion on the slicer. I would like to receive your feedback to improve this design if necessary. I hope you have fun printing my design! I would like to see your print of this design! Please upload your "make" tagging my design and leave a "like" and follow me! Help my work become even more visible.

If you like and want to share this design, save it to your favorites and share the link with whoever you want!

Follow me on instagram @grz.3d

ATTENTION! It is important that each printer is well calibrated and the laminator well configured to achieve a good print!

Tags:

Community Makes (2)

Knife design is great, but that guard needs a bit more of a guide for the blade the whole way down.

Red is TPU-68D (Bambu TPU for AMS) and black is PETG. TPU68D is rigid and grippy at the same time. Id give it a 10/10 for this application.

Community Makes (2)

Discussions

timberwolf12s1 year ago

Knife design is great, but that guard needs a bit more of a guide for the blade the whole way down. Red is TPU-68D (Bambu TPU for AMS) and black is PETG. TPU68D is rigid and grippy at the same time. Id give it a 10/10 for this application.

PrinterBambu Lab P1S

Print bed sizeX: 256 mm; Y: 256 mm; Z: 256 mm

MaterialPETG

Layer height0.2 mm

Infill density50 %

Garza Design1 year ago

Thank you very much for uploading your make! Excellent application of materials! I wanted to make the cover in one piece, that's why it needs more guide, but I also wanted it to be the same thickness as the whole knife. I'll keep that in mind to improve it!