This is an easy to print Slingshot/Catapult.  It is a relatively slim and pocketable design made for backyard/walk around shooting with clay ammo and .6 or .7mm bands

No Supports required.  Use PLA+ or PETG for Strongest results.  5 top/bottom/shell layers at 70% Infill.  

M4 machine screws fit well with a little clearance.  I used 8-32 x 1 1/8" in the example photo, but depending on your printer, they may be too big.

I've used several versions of this without issue refining the design, but be confident you have proper layer adhesion and generally good print quality.  Print at your own risk.

_This page contains affiliate links in which we receive a small commission at no additional cost to you. As an Amazon Associate I earn from qualifying purchases_.

I use these bands (amazon affiliate link) - https://amzn.to/469LdrF

And this clay ammo (amazon affiliate link) - https://amzn.to/47bN7tg 

Easy SlingShot Catapult - Flat Band, No Tie!

slingshot3.stl

Single Wall mountable can holder.  The opening is 70mm in Diameter to hold most aerosol cans, as well as beverage cans and cups.  There are two small closed holes for storage of straws/brushes/pens/etc.  The mounting holes are sized for #6 Screws

Single Can Holder with Straw Storage

Wall mountable holder.  Designed for aerosol cans with straw holder, but fits beverage cans as well.  Openings are 70mm, holes are for #6 screws

Two Can Holder with Straw Storage

slingshot clamps.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Garage Hacker

Achievements

Seedling

Debutant

Pinned models

Easy SlingShot Catapult - Flat Band, No Tie!

Easy SlingShot Catapult - Flat Band, No Tie!

Single Can Holder with Straw Storage

Two Can Holder with Straw Storage