Modular Magnetic Winking Highland Cow Sign

This Winking Eye version of our Highland Cow Sign has the same magnet pattern and is sized to use all of the regular Cow's accessories. This download includes the Highland Cow sign, hooves, hooves holding a blank sign, and the regular cow hat.

Be sure to check back for more themed hats and hooves that will give you even more options for customization!

For 1 sign, 1 hat, and 2 hooves you will need 14 8x2mm rare earth magnets and glue.

When gluing the magnets take care to arrange all of the top facing surfaces to the same magnetic pole, and all of the bottom facing surfaces to the same magnetic pole.

Printing Notes

• When scaling make sure to scale all parts at the same time
• For the 6 color with pauses, the 1st pause is at layer 48 to switch from the sign color (blue) to the inner ear/nose color (light brown)
• For the 6 color with pauses, the 2nd pause is at layer 167 to switch from the cow color (brown) to the tongue (pink)

Model Files in Download 5 Color .3mf with pause at layer 193 to swap from eye color to tongue color 5 Color .3mf 4 Color .3mf Original .stl's for the sign, basic hat, hooves with customizable sign, left hoof, right hoof

Filaments Used in Photos