An almost fully 3D printed frame to display your trading cards/box art and sealed booster packs, or any combination of the three. Designed for Yu-Gi-Oh! ,But should also work well for other TCG's like Pokémon, Magic, One Piece ..ETC.

Make good use of those empty booster boxes you've been collecting. Display those sealed packs and get your favorite card out on display.

Only requiring a 200x150x1mm piece of Perspex or Acrylic (Found on sites like eBay pre-cut), Some double sided tape and a card sleeve. All other parts are printed.

Parts to Print-

• 1x Front Frame
• 1x Mid Frame
• 1x Back Panel Nail or Back Panel Stand and Stand
• 2-3x Lock

Assembly is pretty straight forward. Pictures should get you pretty far but instructions below as well. (Use a piece of filament for the Stand Hinge)

-Cut your booster box to size. (use Mid Frame as guide) (use packing tape on the back if using a pop-out display like i have) -Put your card in the sleeve and attach double sided tape to the back. -Attach double sided tape to the booster pack -Fix both card and pack to back panel (use indentations to help with centering) -Fit Perspex in Front Frame -Fit Mid Frame in Front Frame -Fit Back Panel in Front frame -Slot 2 -3 locks into the groves to hold it all together

Settings I used 4-6 walls/ top bottom layers at 100% infill as i wanted them to be sturdy, and I'm happy with how they turned out.