If you print again, try one using only critical supports. I did a side by side comparison and couldn't really tell any difference between the two, and saved a significant amount of filament
These work great on so many bags. I do have to use something like a cloth or something similar to get a better grip to be able to push the clip tight but that is a personal hand issue I’m sure.
Here is my first make! Not too shabby. I printed the base with zero infill and no top layers so I could add the rocks. I'll probably modify the file so I can print with a solid top just recessed to use less rocks next time. Also used a Dremel to notch the traps so the latch has something to bite onto. Has a nice satisfying snap sound now when engaging the lock.
Working on fixing these... There is a workaround in the meantime. If you right-click the small picture on the right and select open image in a new webpage it will "uncrop" and display correctly.
.png&w=3840&q=85)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=256&q=75)
.png&w=3840&q=75)
If you print again, try one using only critical supports. I did a side by side comparison and couldn't really tell any difference between the two, and saved a significant amount of filament
Looks great!
Your print photo on the assembly didn’t fully upload, so its missing most of the information
Working on fixing these... There is a workaround in the meantime. If you right-click the small picture on the right and select open image in a new webpage it will "uncrop" and display correctly.