Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4671180.

Dewalt 795 case comes pretty empty and wasted space.
A reorganized batteries and printed a couple of cases to optimize the capacity.

I can carry drill bits, drive bits and some pipe wrenches.
Also space to carry some screws and other stuff.

There a two tipes of top cover for the bits, one is larger to just cover the small bits, and the smaller one to cover the larger bits. loos at the pictures.

Inserts for Dewalt 795 tool case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4910917.

Printed with .4 line width, no filling anywhere ans layer height of 0.24

You sould add some rubber or felt feet if you want.

You need 2 copies printed to hold the ipad.

This is for the 2018 model, 12.9"

If after printing your ipad does not fit the slot (maybe for calibration issues) you could heat the piece a bit (heat gun or hot watter) and bend the lip so it fits properly.

Ipad pro drawing stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5197594.

Tool tray for my new Cricut Maker 3.
It could fit other machines but I can't be sure.



Cricut maker tools tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5401633.

This is a remix from this:
https://www.thingiverse.com/thing:5334319

I further reduced the height so it takes less time to print.

You could play with infill as I did but it might no be necesary.

Uses a M8 bolt with a washer at the screw hole that the original mount already has for attaching it on shafts.

Inside the original mount there is a metallic ring that you must be rotated or removed so 
the bolt goes through the opening without damaging the ring.

Amscope - Eakins - VESA mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3838148.

I designed this to make dividers for the drawers in this organiser.
Pretty straight forward. 
Just print and use.

Separador cajones Stanley 1-93-980

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3854400.

Just a quick handle for my Ender 3.
I didn´t like the ones I saw.


Ender 3 bed handle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3791334.

I remixed this to make a better fit with no gap with the profile.
Also added some strength to the part. Maybe not needed.

Do not use screws longer than 5mm



Ender 3 X Endstop Switch Slider

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6025236.

Made this to support a dragchain bought on aliexpress (model R18, 10x20 open)

Part 1 holds tyrh chain, cable and air tuber on the laser head.

Part 2 hold the other end of the top chain.

Part 3 holds the side chain to the Y gantry.

You'll need some M3 screws and some zip ties.

Sculpfun S30 dragchain fix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5887794.

Aqara cube holder to prevent false activation.

Aqara Cube holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5203283.

Adapter for using Stabilo 88 pens with Cricut Maker.

Remixed to void using supports and print faster.

Stabilo adapter for cricut maker

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FernandoCheca

Achievements

Seedling