Custom rugged box for storing your Combustion Inc CPT probes, boosters, and display with a spot for charging cables.
There is an option for dual probe or single probe. I used prusaslicer setup with 3 extruders to print the logo in color starting with the black lettering, then the red flame, and finally the rest of the box. I used Overture Matte Yellow PLA, Overture Jeans Red PLA, and Overture Black PLA Pro. I also used the Overture Black PLA Pro for the latches in hopes that they will stand up to the stress of repeated opening and closing over time. For the gasket seal, I used a 95a shore TPU filament in black. To assemble the box, I used 6 (six) M3x0.5x30mm machine screws with hex socket heads from amazon. I purchased these specifically: https://www.amazon.com/dp/B07NSWS9MM?ref=ppx_yo2ov_dt_b_product_details&th=1 (not an affiliate link).
I remixed this from the box that Whity posted on Printables and I'm adding my attribution to the remix here because the Thangs.com "inspiration and attribution" box won't accept the link. You can find it here: https://www.printables.com/model/258431-rugged-box-parametric