This is a 1x5x5 Gridfinity bin, which allows you to store a common rugged Box modell upside down. In my case I use the rugged TS101 Box to store my Pinecil soldering iron. 

The Box I am using: https://www.printables.com/model/479937-ts101-rugged-box-magnetic-version/comments?lang=de

The Gridfinity bin may very well be compatible with other boxes that are based on this but have different inserts. No guarantees though... 

Gridfinity bin rugged Pinecil Box

Gridfinity bin Pinecile Case.3mf

This is a 1x5x6 Gridfinity bin with a cutout for a utility/cutter knife. The knife was acquired at Toom Baumarkt, but might also be available somewhere else. 

I have attached a picture of the knife so you can check if you have the same one. 

Gridfinity bin Utility/Cutter knife

Gridfinity bin Utility Knife.3mf

This is a Gridfinity bin to contain the Rossmann Ideenwelt Flashlight, it might also fit other different Flashlights. The bin also contains three slots for AAA Batteries in the back.

Gridfinity bin Rossmann Ideenwelt Flashlight

Gridfinity bin Flashlight.3mf

This is a 1x1x3 Gridfinity bin with an Inlay to store up to around 20x Gridinfity Picks, it also contains cutouts to get the picks out comfortably

Gridfinity bin Ifixit Picks

Gridfinity bin Ifixit picks.3mf

This is a 1x5x6 Gridfinity bin with an custom inlay for one of those cheap desoldering pens you can get from amazon. This particular one came under the name Towot. 
The main feature is that the bin is large enough to be stackable. 

Gridfinity bin Towot de-Soldering inlay

Gridfinity bin Towot de-Soldering.3mf

Theres a lot of different bins to hold 6008 bearings out there, however I wanted one which had a small footprint and was stackable. So here it is, it holds up to 20 bearings easily accessible in a 2x1x6 footprint. 

My inspiration for this came from another model that also stacked the bearings verticaly, but was smaller. owever i couldn't find it to give credit, feel free to comment this and i will add it in the inspiration.

Gridfinity bin for 20 6008 Bearings stackable

Gridfinity bin 20 6008 Bearings.3mf

This is a solid 2x1x6 Gridfinity Bin with a cutout that fits a standard Pelikan 30ml Ink vile. There are spaces left free above and below the cutout so you can add labels with multi color printing if required. 

Gridfinity bin for 30ml Pelikan ink viles

Pelikan Ink bin.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FaultierFlash

Achievements

Seedling