TENSO Bike Storage Solution
Minimal and functional, designed under the FORMAstudios label. Focused on clean geometry, everyday usability, and reliable 3D printing.
A wall-mounted bike storage solution that keeps your floor clear and your space clean. The TENSO wall mount holds your bike at a flat angle against the wall – out of the way, but always ready.
The kit consists of two brackets that sit on the wall and support the wheels, and a wall plate with a hook that attaches to the handlebar, seat post, or frame. Hook and wall plate are connected with a rope – simply tie a knot behind the plate and one at the hook. Trim the excess.
Note: Drilling required.What you need
- Rope with a diameter of 6–8 mm
- M4 countersunk screws for the brackets
Print Instructions Layer height: 0.2 mm Walls: 3–4 Infill: 30–40% / 100% for the Wall Bracket and Hook Infill type: Gyroid Supports: None
Disclaimer Load capacity has not been formally tested. The built example holds my bikes that under 12 kg without issue. The brackets have been stood on by a person weighing 85 kg without failure. Build and use at your own risk.
The digital file may not be shared or redistributed.
FORMAstudios Minimal design objects for everyday use.
TENSO Bike Storage Solution
Bowl003 by FORMAstudios
Bowl002 by FORMAstudios
Bowl001 by FORMAstudios
Vase10 by FORMAstudios
Vase009 by FORMAstudios
.png&w=3840&q=75)
Vase008 by FORMAstudios
Vase007 by FORMAstudios
Vase006 by FORMAstudios
Vase005 by FORMAstudios
Vase004 by FORMAstudios
.jpeg&w=3840&q=75)
Vase003 by FORMAstudios
Vase002 by FORMAstudios
.jpeg&w=3840&q=75)
Vase001 by FORMAstudios
Planter009 by FORMAstudios
Planter008 by FORMAstudios
Planter007 by FORMAstudios
Planter006 by FORMAstudios
Planter004 by FORMAstudios
Planter005 by FORMAstudios
