Remix of Plain Tissue Boxes for Remixing by DaveMakesStuff

Hairify add on by Maker Tales
https://makertales.gumroad.com/l/Hairify

I scaled down the original model by 60% to make the bridging easier. It is now ~85mm bridge. 
The box is flexible and morphable because top and bottom are connected by "hair".

Tips:
Print at lower temperature
Add brim
part name:
hairify_box_v2
Top Up Lid(0.58)loose_v2

Hairify- tissue box

hairify_box.stl

Top Up Lid(test fit tight).stl

hairify_box_set.stl

Remix of Ripple Vases (Cube) and Ripple Vases (Round) by DaveMakesStuff
link: https://social.thangs.com/m/262517

Hairify blender addon by Maker Tales
https://makertales.gumroad.com/l/Hairify

This design is inspired by old Digimon character "Togemon" . Ripple texture from dave's vase brings out the "cactus" feel, while hairify addon from Maker Tales gives it some spikes.

Tips:
Trim those spike shorter will make it more spiky
no support needed

hairify-spiky cactus vase

Remix of Ripple Vases (Cube) and Ripple Vases (Round) by DaveMakesStuff
link: https://social.thangs.com/m/262517

This design is inspired by old Digimon character "Togemon" . Ripple texture from dave's vase brings out the "cactus" feel, while hairify addon from Maker Tales gives it some spikes.

Tips:
Trim those spike shorter will make it more spiky
no support needed

Description
This is a 3D printable model based on HOLOLIVE talent USADA PEKORA. There are other models available on OPENSEA and PATREON.
You will get a google drive link upon purchasing any selected model on Opensea. It consists of .stl files, .blend file and step by step assembly guide. I only upload the stl files here. If you wish to support my work, please purchase them from OPENSEA or subscribe my PATREON 
Please check out the following site for further information: 
Youtube Intro Video: https://www.youtube.com/watch?v=P2BCtvoKjLU
Opensea: https://opensea.io/FANMADE_NFT
Twitter: https://twitter.com/FANMADE_NFT
Patreon: https://www.patreon.com/FANMADE3DPRINTABLE

DISCLAIMER:
These are purely fan made. Please credit me and HOLOLIVE if you wish to share any of my work here.


3DPRINTABLE_PEKORA

pekora_ILLUSTRATION_ONLY.stl

Remix of Planetary Snowman by 3dprintingworld

I made the snowman into Voronoi shape, it is kinda like snow globe.
And I change the gear shaft into Christmas tree instead of the original cylinder shape.
It is sturdier than what it looks, but quite a challenge to print.
Ideally print in multimaterial.  

UPDATE:
pls check the file name before printing

single material:
[v4_THANGS_CHRISTMAS_tree_remix.stl]
[v5_THANGS_CHRISTMAS_tree_remix.stl] (thicker wall, added manual brim on sun gear, remove after printing)

MMU :
[v4_THANGS_CONTEST_CHRISTMAS_MK3_MMU.3mf] (I dun have MMU, so pls check the toolpath)

TIPS:
enable z-hop and put more glue stick to avoid knock over issue


Voronoi_christmas_tree

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Planetary Snowman

I design 3D printable files for anime character

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

FANMADE_3DPRINTABLE

Achievements

Seedling

Explorer

Debutant

Hairify- tissue box

hairify-spiky cactus vase

3DPRINTABLE_PEKORA

Voronoi_christmas_tree