This is a mechanical holder for an iPad Pro 11". I used it to mount my iPad next to my grill on a wooden shelf. The wooden bar has the dimensions 38mm x 16mm. The holder uses gravity to hold the iPad in place. 
In addition to the printed parts, you will also need a rubber band that attaches to the back of the holder. It ensures that when the iPad is removed, the holder springs back to the open position.
Two M3 screws and nuts are also needed to attach the holder to the wooden beam. For the joint on the attachment I used an Ikea Ivar pin. This is more stable than a printed axis.
I printed with PLA, partly with 100% infill. 
Of course you are responsible for your own mounting. I assume no liability should damage your iPad or anything else. 


mechanical iPad holder

Gehäuse.stl

This is my modular wardrobe. It is made of three parts. By printing the middle piece several times, it can be extended as needed. Each element can be screwed into the wall, whether this is necessary depends on the weight that is to be hung on the wardrobe and the wall in which the screws must hold. 
Of course, the hooks can also be printed as often as you like. 
I have printed the coat rack including the hooks from PTEG. Whether a 100% infill for the hooks is necessary is to be decided depending on the application.

Modular Wardrobe

Garderobe_Anfang.stl

This hook is plugged into the rod of the headrest of one of the front seats of a VW Transporter. Thus, for example, jackets can be opened in the rear area.

Hook for the headrest of a VW Transporter

This money box in the form of a doghouse I first printed in white with black bottom. Then glued by means of texture paper. Of course, it can also be painted or possibly printed from wood filament. So that you do not have to destroy the can to get to the savings, you can simply remove the two-part bottom.

The Dog in the pictures is not part of the model

Dog house money box

Hundehütte.stl

This is my version of a holder for a razor. This is designed to for the suction cups from the IKEA TISKEN system. The suction cup can be ordered [here](https://www.ikea.com/de/de/p/tisken-haken-mit-saugnapf-weiss-70381275/).
I have printed the holder from PTEG.

IKEA TISKEN - Holder for razor

Halterung für den Rückreflektor des VanMoof S3. Damit kann der Reflektor aus dem Lieferumfang an die Schrauben vom Schutzblech geschraubt werden

VanMoof S3 Reflektorhalterung

3D printing and design is my passion. All my designs are free. You can use them, print them or modify some of them. If you share the results online, for example in social media, please link my name. Have fun.
If you want to support me, I like coffee!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

F. Weinmann

Achievements

Seedling