This is a quick jig I designed to hold 50x70mm copper clads with photoresist film applied to expose my designs using the Anycubic Photon.

This technic yields very detailed results with some practice and cuts out the need for transparencies and other methods of exposing the PCB.

You just need to print it, place it inside the printer instead of the vat and screw it in place. It should align itself and leave you with a square of exposed screen.

Software-wise you will need to convert your PCB design to an STL so it can be sliced for the photon. I used 3D Builder on windows and Blender, but I am still figuring it out. Then you insert the STL to Photon workshop or other slicers and center the object. Slice with a bottom exposure time of around 6-8 minutes and load it onto the machine. After placing the PCB, photoresist down, run the file and after the time has passed you can retrieve your expose PCB. Etch and voila!

I am still learning and trying to perfect my technic but I have made some pretty nice boards.

#thangs100k

Photon PCB Exposure Jig 50x70mm

Introducing the Murder Brick™, the worlds most advanced pain-inducing brick.

Download and print NOW to experience levels of pain you would not think are possible!

 A resin printer would produce the best results, in looks and pain levels.




#thangs100k

Murder Brick Logo Upside-down

MurderBrickLogoUpsidedown.stl

Murder Brick

Murder Brick Logo

MurderBrickLogo.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Evis

Photon PCB Exposure Jig 50x70mm

Murder Brick Logo Upside-down

Murder Brick

Murder Brick Logo