Eskimo P
Eskimo P

Halloween Window Bat

by
Eskimo Pie
Eskimo Pie
Follow
Eskimo Pie
Eskimo Pie
|
Image 1 of 5
 Halloween Window Bat 3d model
Eskimo Pie
Eskimo Pie
|
Image 1 of 5
 Halloween Window Bat 3d model
2D
3D
Makes
 Halloween Window Bat 3d model
 Halloween Window Bat 3d model
 Halloween Window Bat 3d model
 Halloween Window Bat 3d model
 Halloween Window Bat 3d model

Halloween Window Bat

This is a bat with wings, eyes, and ears that illuminate in the window or from a lamp. Use a two-sided sticky pad or equivalent to cling to a window. This can be printed in multicolor or color with layer changes. The wing membrane is 0.2mm thick (single layer thick). The thinness of the wing membrane allows light to pass through. I recommend using silk and make sure you leveling is good. Wait until it is fully cooled to remove from the bed or risk tearing wings. You will need to scale for smaller beds. Make sure you take thickness into account when scaling.

*Prototypes in photos are scaled down in size. I do not have a Max size printer. 3D printing settings

0.2mm layer height no Support scalable.


13 Likes33 DownloadsSeptember 20, 2024