Ender 3 Belt 45 Screen Enclosure

LCD_TOP.3mf

45mm X 7mm Comgrow Z1 10w Height Block

A simple 45mm X 7mm high block for setting the proper focal length on a Comgrow Z1 10w laser module.

Ender 3 Belt kit Y Axis stepper mounts

Y_STEP_MOUNT_LH_V2.3mf

BULB_TREE_HOLDER.3mf

Adapter for 3D printed bulbs to hang on a tree or wherever you want.

This is designed to use with Cork Fairy Lights, clips onto the bulb base and allows access to the switch on the lights.

When setting up your bulb in Lithophanemaker the following parameters need to be used for this adapter:
Cylinder Outer Diameter 27
Cylinder Height (Minimum) 15
Cylinder Thickness 3
Cylinder Ledge Outer Diameter 33

Ender 3 Belt PSU Under Mount

This is for mounting the PSU Under the belt when using https://social.thangs.com/m/39942

Ender 3 Belt Base

Voron inspired base for the Ender 3 belt3dprinter.com belt conversion.

All printed in PLA+ except TPU Feet, use your imagination for colors.

Print
1 - Front Skirt
1 - Rear
2 - Side Skirt A
2 - Side Skirt B
2 - Side Fan Support
4 - Fan Blank
4 - TPU Foot
1 ea of all 4 Corner A, B, C, D
1 ea of the letters if you want to inlay the front logo

Hardware Needed:

Attach Skirt to Printer:
4 - 3mm X 5mm Heat Set Brass Inserts
4 - M3 X 25mm Socket Head Screws
20 - M3 T-nuts
20 - M3 X 8 Socket Head Screws
4 - M5 T-nuts
4 - M5 Socket Head Screws

Legs:
4 - M5 X 16 Socket Head Screws & Hex Nuts for Feet
12 - M3 X 6 Button Head screws for baseplate

Fan Blanks:
16 - 6 X 2 Neodymium Magnets




E3B_FRONT_SKIRT.stl

27mm Bulb Base

Printed base for Litho Bulbs made with 27mm neck. Designed to hold bulb with cork-lights

Edge_Of_3D

Achievements

Seedling

Debutant

Explorer