You usually put two 1kg spool inside PrintDry Pro. I don't, I put four 1kg spool and dry them together. The black rubber prevents you from doing it, yet without the black rubber, your spool is too low and overheat from the hot air. So here is a spool holder that allows me to get four spools in the center. Diameter is designed for prusament sized spool, but expect a slim spool.

Print with abs/asa for >=75C drying. You can also print with other material if you know it can handle the temperature you are using. Assembly by inserting the black hard plastic ring inside the given spool holder, you will want 4 ring for each overload spool holder. Exactly using up all 8 black rings PrintDry give you.

PrintDry overload spool holder

Enjoy the butter smooth filler spool holder on voron v0. Size comparable with official spool holder, but smoother and now you can quickly remove the spool holder during transport/storage without screwdriver.

Supports mounting on right front and back right. It replaces the middle panel clip, reusing the nuts. You may look at the photo for reference. Instead of original length filler, you can measure your common spool thickness and get a smaller filler remix for best space saving. Here is my favorite mini filler:

1. [66mm] Filler 66mm Remix https://www.thingiverse.com/thing:5335512
2. [56mm] Even SHORTER Filler Filament Spool System https://www.thingiverse.com/thing:5241172

Installed with M3x10 screws. The design will hold the nut exactly where the screw goes in. Just remember to only insert the screw after the nut has reached the bottom. It is designed to be loose to handle poorly printed filler.

Voron v0.1 v0.2 filler spool holder brace

voron v0.1 v0.2 filler spool holder brace

Parametric battery case that can be printed in very short amount of time and plastic.

Designed for carrying batteries during travel. Not meant for harsh squish/puncture, but more than sufficient to protect from shorts/scratches/scattering. It is especially beautiful when printed in clear PETG, more than what photo can show.

You can adjust the parameters in openscad according to your need and printer condition, such as number of battery, battery size, tolerance. Note that vase mode wall width should match your actual print setting.

Recommended print setting:
Vase mode: yes
Extrusion width: 0.65mm
Material: PETG for best effect, PLA ABS is ok
Color: Clear is stunning shiny

Parametric vase mode battery case

4aaa_curved.stl

Hey how about giving a cute dog some hair with the new plugin?
Remixing [by JackTheTinkerer] dog

Oh wait
Oh no
Now I cannot unsee this
Now we cannot unsee this
This is giving me PTSD,
Not for contest, you sick human.


Dog with hair

Using hairify plugin to generate yummy strings of pizza.

It is created by:
First cut a slice of pizza from the full pizza. Then generate hair from the slice to the remaining pizza. The caveat is that the hair are limited to perpendicular line so it will not look like how real pizza string. To get over that limitation, you need to put the slice very close to the pizza when using the hair plugin, then carefully select all vertices of the slice and stretch it outwards.

Remixed from [by xxotic] Pizza:
https://www.thingiverse.com/thing:5762624

2nd pic is generated from [by The-Mechanic] Pizza:
but it has no derivative license so public remix is not ok
https://www.thingiverse.com/thing:3200845

Hairify stringy pizza

Stringing pizza by hairify

Using hairify as representation of flow.
The trick is by using a rod as hair shell so that the hair extend inwards.

Cut the center piece to free the strings, Then use a blowdryer to soften the strings. Stir the strings before it cools down.
You need a good printer and a lot of patience to work with the lite version, so choose large version.

Remixed from [by twinpic] Playmobil Toilet
https://www.thingiverse.com/thing:1958958
PS: can't really find how to add remix from another site.

Hairify flushing toilet

toilet_lite.stl

toilet_large.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Echo Howard

Achievements

Seedling