Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2447280.

Consolidated post of all my TRX-4 Designs.

Fender Vents
Front Bumper
Front Winch Mount Bumper
Rear Bumper
Rear Winch Mount Bumper
Window Guards





TRX-4 Parts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2257427.

Combination of a Fidget spinner and my [Geared Keychain](http://www.thingiverse.com/thing:1805812).  Uses two 608 ball bearings.  Can be used as a weighted off balance spinner or as a gear roller.

If you make one please post feedback and pictures!

Geared Spinner - Fidget Toy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4445498.

Totally redrawn.  Uses similar geometry. Designed to use LED Strip wrapped around the inner mantle powered by a battery in the base.

Little Lantern (LED Strip)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5021099.

Cat Flap for interior walls.  Separate the parts when printing and Superglue together.

Fat Cat Door with Flap aka CatDppr

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2770738.

Reworked the Lulzbot Olive Extruder. Changes include total rework of geometry and addition of probe mount.

Lulzbot TAZ 5 Modified Olive Toolhead

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1149597.

Firstly, Thanks to the users of the Lulzbot Community and Lulzbot itself for the open designs and great user support.  

Secondly, Thanks to Vitormhenrique for the inspiration and getting the ball rolling a while back when he did his upgrade.

This combination of Files and software will update a TAZ 5 to Marlin 1.1, Enable auto bed Leveling and Thermal Protection, Add a Z-Probe, better extruder fan, and Dual Filament Cooling Fans.  You will need to purchase, a Z-Probe, Opto isolator, 2 40mmx10 24v fans, 1 40mmx10 5v fan, the proper connectors (depending on build date of your TAZ 5), and some new screws and heat set inserts.

The Firmware has been ported with the Taz 5 settings by Sebastian.  The changes from vanilla Marlin 1.1 are listed below:



You will need to print:
-Left, Right, and Extruder Fan Ducts (Lulzbot)
-Strengthened Extruder Mount and Spacer
-Z Probe Mount
-Extruder Mount Lancewood (Lulzbot)







Lulzbot TAZ 5 Combo upgrade

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2296011.

This is the current Emergent Printing Fidget Spinner Lineup.  All files are designed in Fusion360 and the solid files are included here for you.  To support endeavours like this please consider purchasing one or more from https://www.facebook.com/EmergentPrintingandDesign

Fidget Spinner Collection

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4009746.

Credit to Mike-vom-Mars for the original design. I reworked it to fit a Note 8.  Source files included.

DJI Mavic Spark Galaxy Note 8 Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2371357.

Simple backing plate with a recess for a .500" by .125" magnet.  The magnet will need to be epoxied in and there is clearance as such.  Works with the Harbor Freight Machinists Dial indicator and likely many more.

Dial Indicator Magnetic Backplate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:962243.

Update 3/16/17:   The project has been totally rewradn and now included individual models and the solid file.

I designed this for my CNC Router.  It is designed to be cut out of wood using only a .5EM and a .25EM.  The 3d Model can be 3D printed also and used.  




Dust Shoe for 80mm Spindle and 4 inch dust collector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2074838.

Cubby gauge pos for 05-09 LGT.  This is a work in progress.

Legacy GT Cubby Gauge Pods

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2316567.

This is a design I did a while back for the new 20700 sized batteries.  It includes enclosed magnets, enclosure, and battery tray.

20700 Battery Enclosure and Tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2179242.

I fixed the off center riser recess on the bottom, redrew almost all of the curves to have tangency to adjacent lines for smoother transitions and thickened the base a bit. Step file inlcluded.

Oculus Rift Mount updated

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3432029.

IO Shield for SuperMicro X8DTL-3F

X8DTL-3F IO Shield

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1805812.

Just a small key chain I designed.  There shouldn't be any issues with tolerances assuming your printer is dialed in.

Geared Keychain - Fidget toy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2288742.

Monopole Spinner for small hands

Monopole Spinner - Fidget Toy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2285863.

Inspired from GoAftens phone stand.  Redesigned to fit my Galaxy Note 4 with Otterbox Commuter Case.

Note 4 (and similar) Phone​ stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2949431.

Fits 2008 and up KLR 650 and possibly others. Replaces the rubber section of the turn signals.  You will need 4 #10 x 1.25" screws to secure them.

KLR turn signal repair

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2823591.

You must enable the sensor in FW.  Plenty of tutorials out there for that.

Lulzbot TAZ 5 Mechanical Filament Run-out Sensor

Parametric Enclosure

Sides

Back

Back Left Door

Back Right Door

Slats

Divider

Tabletop

Storage Bottom

Castors

8789T41_Cart-King Caster

Plugs for Saunders Machine Works .500" fixture plates 

Hole Plug v3.stl

Plugs for Saunders Machine Works /500" fixture plates 

Mount for JTech 7W Pro Laser module.  2.5 OD slides easily into sweepy or other similar sized dust shoe Vac hose hole.

The through holes are slightly undersized so you can drill out to .125".  Glue in magnets.

https://www.amazon.com/gp/product/B077K364Z7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Jtech 7W Pro Sweepy Mount

Mount for JTech 7W Pro Laser module.  2.5 OD slides easily into sweepy or other similar sized dust shoe Vac hose hole.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

Discojon

TRX-4 Parts

Geared Spinner - Fidget Toy

Little Lantern (LED Strip)

Fat Cat Door with Flap aka CatDppr

Lulzbot TAZ 5 Modified Olive Toolhead

Lulzbot TAZ 5 Combo upgrade

Fidget Spinner Collection

DJI Mavic Spark Galaxy Note 8 Mount

Dial Indicator Magnetic Backplate

Dust Shoe for 80mm Spindle and 4 inch dust collector

Legacy GT Cubby Gauge Pods

20700 Battery Enclosure and Tray

Oculus Rift Mount updated

X8DTL-3F IO Shield

Geared Keychain - Fidget toy

Monopole Spinner - Fidget Toy

Note 4 (and similar) Phone stand

KLR turn signal repair

Lulzbot TAZ 5 Mechanical Filament Run-out Sensor

Parametric Enclosure

Hole Plug v3.stl

Jtech 7W Pro Sweepy Mount

Discojon

TRX-4 Parts

Geared Spinner - Fidget Toy

Little Lantern (LED Strip)

Fat Cat Door with Flap aka CatDppr

Lulzbot TAZ 5 Modified Olive Toolhead

Lulzbot TAZ 5 Combo upgrade

Fidget Spinner Collection

DJI Mavic Spark Galaxy Note 8 Mount

Dial Indicator Magnetic Backplate

Dust Shoe for 80mm Spindle and 4 inch dust collector

Legacy GT Cubby Gauge Pods

20700 Battery Enclosure and Tray

Oculus Rift Mount updated

X8DTL-3F IO Shield

Geared Keychain - Fidget toy

Monopole Spinner - Fidget Toy

Note 4 (and similar) Phone​ stand

KLR turn signal repair

Lulzbot TAZ 5 Mechanical Filament Run-out Sensor

Parametric Enclosure

Hole Plug v3.stl

Jtech 7W Pro Sweepy Mount

Note 4 (and similar) Phone stand