Introducing my version of the Spectra Swallow used by Serge in Chrono Cross! It is print in place with no minimal supports. This was made with a 1/2 inch diameter PVC cavity in the handle for support. You may need to use a brim for better stability while printing.

You will need to print x1 of everything except the following: Blade Top x2 Blade Bot x2

For assembly PVC should be cut to about 36 inches (914.4 mm). Glue the two parts of each blade top and bottom together to have two whole assembled blades. You can put in the PVC core as you assemble the handle then attach the assembled blades on either side.

Make sure the triangle "keys" on the handle are facing in opposite directions as this pertains to how to line up the blades as well. When attaching the blades to the handle make sure the triangle keys are lined up. When you have them lined up the triangles should be on the "backside" of each blade and the blades will face in opposite directions on the handle. See image for visual alignment.