4 Point Shuriken Spinner Mini

269 downloads · 2 years ago · Introducing the 4-Point Shuriken famously used by Greninja in Pokemon but as a small fidget spinner!

This model is restricted by licensing terms.

View license.

Description

Introducing the 4-Point Shuriken famously used by Greninja in Pokemon but as a small fidget spinner! It is print in place with no supports but you may need to use a brim or adhesive on your bed because of the bearings.

Tags:

Discussions

AquariaCrafts10 months ago

This print is amazing. I've been looking for a 4 point shuriken spinner for months for my greninja cosplay. This was perfect!

There's a few occasions where the balls get stuck, but those were easily unstuck with a set of pliers.

Thank you for this file!

Dice3D Designs 10 months ago

It can be finicky working with a small scale like that. But I'm glad you like it!

varnelldalton1 year ago

I also just printed it, without issue, even at 300mm/s

Dice3D Designs 10 months ago

Awesome!

Frosty_stryk1 year ago

i printed this twice, the first time i had the same problem as other person who posted, the bearings were melted sop would not spin and i kept the bed at 45c, i made it again this time adding about 8cm between the bed and the print added easy to remove supports and it was almost perfect, i used PLA i would love to have more information i know a few people who would love this.

Dice3D Designs 1 year ago

I'm not sure to be honest I've mass printed this exact latest version and have like no issues with any bearings being fused. I've even checked in my slicer layer by layer nothing is fused at any point.

zackarydunbar1232 years ago

tried printing and it wouldn't spin, any tip. the balls were stuck together

Dice3D Designs 1 year ago

Sorry for late reply. I'm not sure because I've printed this exact latest version several times nothing is fused. Have you checked layer by layer in your slicer? There shouldn't be any fused spots.