I've started learning Blender and made this after my first donuts. 

Inspired by my brother.

Clearly the whiskers do not print. 
Supports are necessary. 
If you use 0.20 layer height try setting the Z distance for the supports (top and bottom) to 0.24, they come off smoothly without sacrificing too much to the quality.
The rest is kinda up to you, if you want a smol cute cat for your desk.

smolcat_v2

smolcat_v2.3mf

Do you like mounting things to walls to free up horizontal surface space? Of course you do. Do you like hexagons? Of course you do. Here is one solution to both of those things 

I'm sure we can agree that hexagons are the bestagons, and sometimes we want to get our devices up off the table and mounted to the wall.

This wall mount for electronics such as routers or laptops, also has hooks for an extra lengths of cable.

Remember to use drywall or masonry anchors as necessary, I'm not responsible for poor wall fastening practices.

Honey Comb Small Electronics Wall Mount

electronics wallmount.step

Storage box for specific chess board and pieces:
Chess Board by evanrkeller [https://www.thingiverse.com/thing:5593306](url)
Chess Pieces by grizzie17 [https://www.printables.com/model/511784-chess-pieces](url)

I felt the knight was one of the most iconic pieces in chess, but I'm thinking of making front covers with other pieces in the design.

Original files include a .3mf single print body w/ drawer and front cover, a .3mf assembly for flat printing, and each part as .step

Chess Box

ChessStandComplete.3mf

I wanted a posable tripod that would fit a camera mount atop a 12mm ball.
I used that same 12mm ball and 12.2mm cup to design articulated posable legs.

The inside cup of the joints use fuzzy skin, you may want to adjust them to get the friction you want. The fuzzy skin will wear with use.

I added modifier shapes to areas where I didn't want fuzzy skin, included in the file.
Other feet pieces or segments could be designed using the same 12mm ball and 12.2mm cup.

I've already found a need for more grip on the feet. They don't grip smooth, glossier surfaces. Something like TPU might be needed.

Might struggle with heavier cameras.

Posable Tripod

Tripod v13 Mid Friction.3mf

I have provided full color and single color models.
3mf files saved with my settings, but your mileage may vary.

Printed on X1C with BL PLA filaments.

I actually designed this for a friend and sent it to him for assembly, so I don't have any photos of it, myself.

Link's Awakening Display Box

LA-Box v5 Full Color.3mf

Had a ton of Burt's Bees lip balm sticks after Christmas, but no place to hold them.

So I thought bees make honeycombs, honeycombs are hexagons, and hexagons are the bestagons. Here we are.

The corners have a bit of room to put text in your slicer of choice. I used Orca Slicer.

Works with Chapstick and other narrower lip balms, too.



Honey Comb Lip Balm Holder

HoneyCombLipBalmHolder.step

This is one of my first models that I just recently realized I should share.

"Triangle" Rubik's Cube Stand

cubeHolder.3mf

Simple two tier sink caddy.

I added manual support exclusion for the interior of the column posts. Otherwise everything is pretty basic. Printed on my X1C.

Sink Corner Caddy

SinkCornerCaddy.3mf

Display stand for The Legend of Zelda: A Link to the Past cartridge for SNES with pop out title.

Both full color and one color version printed on Bambu Lab X1C with 0.4mm nozzle using Bambu Lab PLA Basic.
Supports can be a bit of trouble on removal.

Assembly is fairly straight forward. The shield attaches first, then the sword and title piece fits in to the smaller slots and sits on top the shield. Use your favorite adhesive for assembly.

"The Legend of Zelda: A Link to the Past" Cartridge Display

ALTTP-Box v8.3mf

3 dimensional rendering of the 1st main cabin from Stardew Valley.
It's broken into pieces for easier multi-color printing or painting.

I printed this on a Bambu Lab X1 using the Bambu ash gray matte filament.
I painted this with acrylic paint brush markers my wife found, if I can find out where I'll share.

If you'd like please share your prints and experience with printing this; and leave a comment of what you might like to see next.

Stardew Valley Cabin

SVCabin.3mf

Simple modular PCIe card stand. Assembled with the included dowels and biscuits.
I was able to print cleanly without support.
Printed on Bambu Lab X1 with Bambu Lab PLA Basic.

.3mf file configured with two plates, two 1-unit PCIe card holders and two 2-unit PCIe card holders.

Print with an ESD safe filament if you're concerned about that stuff.

Modular PCIe Card Stand

PCI-Card-Holder.3mf

ALTTP-Box Full Color.3mf

ALTTP-Box one color.3mf

LA-Box v5 one color.3mf

I like to find creative ways to solve problems and make fun art projects. 
I'm working on more all the time, so if you like what I'm creating please follow me here and/or on my socials for more.

If you like my models you can get an early look at what I'm working on and support me at ko-fi.com/deskdivision or the link above next to my "Twitter."

I also stream video games at twitch.tv/tripleace27!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

DeskDivision

Achievements

Explorer

Seedling

Debutant

Pinned models

Stardew Valley Cabin

"The Legend of Zelda: A Link to the Past" Cartridge Display

Link's Awakening Display Box

smolcat_v2

Honey Comb Small Electronics Wall Mount

Chess Box

Posable Tripod

Link's Awakening Display Box

Honey Comb Lip Balm Holder

"Triangle" Rubik's Cube Stand

Sink Corner Caddy

"The Legend of Zelda: A Link to the Past" Cartridge Display

Stardew Valley Cabin

Modular PCIe Card Stand