This is a remix of Make Anything's [Guitar Wall Mount Hanger with Flexible Top](https://thangs.com/designer/Make%20Anything/3d-model/Guitar%20Wall%20Mount%20Hanger%20with%20Flexible%20Top-927964) to add support for [MultiBoard ](https://www.multiboard.io/parts-library)via [MultiConnect](https://www.printables.com/model/716558-multiconnect-generic-connector-for-multiboard).  This is available in 50mm, 56mm, and 60mm versions depending on the neck width of your guitar.

For printing use 100% infill for the arm and use TPU for the padding.  Use the default orientation.  No support or brims needed.  

For mounting onto Multiboard, use 2 Big Thread MultiConnect Connectors with one space in between.  Then just slide the arm in place.  The padding should friction fit, but can be glued in place if needed.
 
**My print settings**:
Printer: Bambu Lab P1S
Nozzle: 0.4mm Stainless
Plate: Textured PEI
Filament: Arm - Bambu PLA Basic Black, Padding - Sunlu 95A TPU Black
Layer Height: 0.2mm
Wall Loops: Arm - 2, Padding - 3
Infill: Arm - 100% Rectilinear, Padding - 15% Grid
TPU Temps: Nozzle - 208C, Bed - 50C
Dried TPU for 8hrs at 55C
All other settings are default to Bambu Studio 1.10



Guitar Mount MultiBoard MultiConnect Hanger

50mm_Arm MultiConnect.stl

I needed an 8mm offset connector to join 3 Multiboard tiles at the corner so I made my own.  This is based on the Quad Snap Connectors.  

Printing:
Uses the standard Multiboard print settings
0.2mm Layer Height
0.4mm Nozzle
3 Wall Loops
No Support Needed

To use, you will need to print one Part A for the side facing the wall and one Part B for the side facing away from the wall.

8 mm - Triple Offset Multiboard Snaps Parts A & B

8 mm - Triple Offset Snaps (DS Part A).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Derakkon

Achievements

Voyager

Seedling

Guitar Mount MultiBoard MultiConnect Hanger

8 mm - Triple Offset Multiboard Snaps Parts A & B